ARTU USA INC
ARTU USA INC 01270 SDS Plus Drill Bit 9/16" x 12"L
SDS Plus drill bit with a 9/16 inch diameter and 12 inch overall length for rotary hammer drilling
- 9/16 inch diameter drills standard masonry holes
- 12 inch length reaches deep fastening points
- SDS Plus shank fits common rotary hammers
- ARTU brand supplies professional accessory range
- Ships direct from manufacturer for authenticity
SDS Plus Drill Bit for Masonry
The ARTU 01270 SDS Plus drill bit is built for rotary hammers using the SDS Plus shank system. It targets professionals and serious DIY users drilling into concrete, brick or stone. The 9/16 inch diameter and 12 inch overall length suit anchor installation and through-hole tasks. Buyers needing a different shank type or larger diameters should look elsewhere.
Thermals, Noise and Power Draw
As a non-powered accessory, the bit itself generates no noise or electrical draw. Heat produced during drilling depends entirely on the rotary hammer used and the material hardness. Proper drilling technique and periodic withdrawal manage temperature at the cutting edges. No independent thermal or acoustic specifications exist for the bit alone.
Bundled Accessories and Software
The product ships as a single drill bit with no additional accessories, cases or software included. The manufacturer highlights free shipping on orders of 75 or more and direct-from-manufacturer fulfilment. These logistics details affect delivery but do not change the tool's capabilities. No software or firmware is associated with this hardware.
Highlights
- 9/16 inch diameter drills standard masonry holes
- 12 inch length reaches deep fastening points
- SDS Plus shank fits common rotary hammers
- ARTU brand supplies professional accessory range
- Ships direct from manufacturer for authenticity
Specifications
| Brand | ARTU |
|---|
Questions about this item
How do I install the 9/16 inch SDS Plus bit into my rotary hammer and what step is often missed?
Insert the shank fully into the SDS Plus chuck until it clicks and rotates freely; the step often missed is pulling back on the sleeve to verify the bit is locked before drilling.
What maintenance or replacement will the 12 inch SDS Plus drill bit need later?
The carbide tip will dull with use in concrete and masonry; replace the bit when the cutting edges no longer clear dust efficiently or the hole diameter undersizes.
What limit appears first on the 9/16 inch SDS Plus bit during sustained drilling?
Heat buildup at the carbide tip is the first limit; excessive heat reduces cutting speed and can damage the braze joint, so clear dust frequently and pause to cool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
