ARTU USA INC
ARTU USA INC 01258 SDS Plus Drill Bit 1/2" x 8"L pneumatic accessory
SDS Plus drill bit with a 1/2 inch diameter and 8 inch overall length for rotary hammer drilling
- SDS Plus shank fits rotary hammers directly
- 1/2 inch diameter drills standard anchor holes
- 8 inch overall length reaches through thick material
- Chrome-vanadium steel resists wear in concrete
- 6 inch drilling depth covers most fixing jobs
The SDS Plus bit for concrete and masonry
This 1/2 inch diameter bit with an 8 inch overall length fits SDS Plus rotary hammers. It is built from CrV steel for durability in hard materials. The shank diameter is 7/16 inch, matching the SDS Plus standard. It suits trade professionals and serious DIYers drilling anchor or clearance holes.
Insert the shank until it locks with a click
The SDS Plus interface allows tool-free changes in seconds; no chuck key is needed. Ensure the flutes are clear of dust before each hole to avoid binding. The 6 inch maximum drilling depth defines the practical limit; forcing deeper risks breakage or a stuck bit. Regular withdrawal clears debris and reduces heat buildup.
Drills holes up to 6 inches deep in a single pass
The 1/2 inch cutting diameter handles common anchor sizes for structural fixings. CrV construction resists wear in reinforced concrete, brick and stone. It runs out when the hole depth exceeds 6 inches or when the aggregate is exceptionally hard. For deeper or wider holes a longer or larger bit is required.
Highlights
- SDS Plus shank fits rotary hammers directly
- 1/2 inch diameter drills standard anchor holes
- 8 inch overall length reaches through thick material
- Chrome-vanadium steel resists wear in concrete
- 6 inch drilling depth covers most fixing jobs
Specifications
| Brand | ARTU |
|---|
Questions about this item
How can I verify the SDS Plus drill bit is drilling to the correct depth after setup?
Drill a test hole in the intended material and measure the depth; the bit is designed for a maximum drilling depth of 6 in.
What comes in the box with the ARTU 01258 SDS Plus drill bit and do I need to buy anything else?
The box contains the 1/2 in. SDS Plus drill bit with an 8 in. overall length and 7/16 in. shank; no additional accessories are required for use with a compatible SDS Plus rotary hammer.
Which capacity or version of the ARTU SDS Plus drill bit should I choose for my application?
This model is the 1/2 in. diameter by 8 in. overall length version; select it when you need a 6 in. maximum drilling depth and a 7/16 in. shank for SDS Plus tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
