ARTU USA INC
ARTU USA INC 01236 SDS Plus Drill Bit 5/16" x 12" pneumatic accessory
SDS Plus drill bit drills 10 in deep in masonry with a 5/16 in diameter and 12 in overall length
- SDS Plus shank fits rotary hammers directly
- 5/16 inch diameter drills precise holes in masonry
- 12 inch overall length reaches deep work areas
- 10 inch maximum drilling depth handles thick materials
- Chrome vanadium steel resists wear during heavy use
Drill Bit for SDS Plus Rotary Hammers
This SDS Plus drill bit fits rotary hammers that accept the SDS Plus shank system. It is manufactured from chromium-vanadium steel for hardness and wear resistance. The overall length is 12 in, giving a maximum drilling depth of 10 in. The shank diameter measures 9/32 in and the cutting diameter is 5/16 in.
Suited for Concrete and Masonry Drilling
The bit handles anchor installation, through-bolting and hole drilling in concrete, brick and stone. It is not designed for wood, metal or tile work where a different flute geometry is required. Buyers who need a larger cutting diameter or a longer reach should look at other sizes. The shank will not fit SDS Max or spline-drive machines.
Capacity and Headroom in Concrete
The 10 in usable depth covers most residential anchor and rebar holes in a single pass. In very hard aggregate or reinforced concrete the flutes can load up, reducing penetration speed and requiring frequent withdrawal. The 5/16 in diameter limits the maximum anchor size to fixings designed for that hole. For deeper or wider holes a longer or larger bit is necessary.
Highlights
- SDS Plus shank fits rotary hammers directly
- 5/16 inch diameter drills precise holes in masonry
- 12 inch overall length reaches deep work areas
- 10 inch maximum drilling depth handles thick materials
- Chrome vanadium steel resists wear during heavy use
Specifications
| Brand | ARTU |
|---|
Questions about this item
What type of hammer drill chuck is required for the SDS Plus shank on this bit?
The bit uses an SDS Plus shank with a 9/32 in diameter, so it needs an SDS Plus compatible rotary hammer drill chuck to lock in securely.
Can this 12 in overall length bit reach the full 10 in maximum drilling depth in a single pass?
Yes, the 12 in overall length provides enough clearance to achieve the 10 in maximum drilling depth without the chuck hitting the work surface.
How can I confirm the bit is cutting efficiently after I start drilling?
Steady, even spiral dust ejection from the flutes and consistent motor sound indicate the CrV tip is cutting cleanly at the rated depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
