ARTU USA INC
ARTU USA INC 01223 SDS Plus Drill Bit 1/4" x 10" pneumatic accessory
SDS Plus drill bit with a 1/4 inch diameter and 10 inch length for rotary hammer drilling
- SDS Plus shank fits rotary hammers for secure grip
- 1/4 inch diameter drills precise holes in masonry
- 10 inch length reaches deep into concrete and brick
- Carbide tip resists wear for longer drilling life
- New condition ensures full performance out of the box
1/4" SDS Plus drill bit
This 10" SDS Plus drill bit from ARTU USA INC is a new power tool accessory designed for rotary hammers with an SDS Plus chuck. It suits professional tradespeople and serious DIY users who need to drill precise holes in concrete, masonry or stone using compatible equipment. The 1/4" diameter matches common anchor and fixing sizes.
Suited for SDS Plus rotary hammers
Buyers whose rotary hammer accepts SDS Plus shanks will find this bit fits directly without adapters. It is not for owners of SDS Max, spline or standard three-jaw chuck drills, nor for anyone needing a different diameter or length than the 1/4" by 10" specification. Users requiring carbide grades or flute designs not described here should look elsewhere.
Check chuck compatibility and hole requirements
Before ordering, confirm your rotary hammer uses an SDS Plus chuck and that the 1/4" diameter matches the anchor, plug or through-bolt you plan to install. Verify the 10" overall length provides enough reach for the material thickness and any fixture clearance. Ensure the workpiece is suitable for percussion drilling with a bit of this type.
Highlights
- SDS Plus shank fits rotary hammers for secure grip
- 1/4 inch diameter drills precise holes in masonry
- 10 inch length reaches deep into concrete and brick
- Carbide tip resists wear for longer drilling life
- New condition ensures full performance out of the box
Specifications
| Brand | ARTU |
|---|
Questions about this item
Which rotary hammer chuck accepts the SDS Plus shank on this 1/4" x 10" bit?
Any rotary hammer or combi drill equipped with an SDS Plus chuck will accept the shank directly; no adapter is needed.
Can I use this bit in a standard three-jaw drill chuck?
The SDS Plus shank is not compatible with a standard three-jaw chuck; it requires an SDS Plus chuck to lock correctly.
How do I confirm the bit is drilling to the full 10" depth?
Mark the flute at the required depth with tape or a marker; when the mark reaches the hole entrance the bit has reached full working depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
