ARTU USA INC
ARTU USA INC 01145 Multipurpose Drill Bit 3/16 x 16 Inch
Multipurpose drill bit measuring 3/16 by 16 inches for versatile drilling tasks
- 3/16-inch diameter drills precise holes in multiple materials
- 16-inch length reaches deep or through-thick workpieces
- Multipurpose design tackles wood, metal, plastic and masonry
- ARTU branding signals professional-grade accessory quality
- New condition guarantees full factory performance from first use
Purpose and user
The ARTU 01145 is a multipurpose drill bit sized 3/16 by 16 inches. It serves tradespeople and DIYers who need a single bit for wood, metal, masonry and plastic. Buyers who require a specialised bit for only one material or a different diameter should look elsewhere.
Build fit
The 16 inch overall length reaches deep holes and tight cavities that shorter bits cannot. A standard three-jaw chuck holds the shank securely, freeing the user from switching bits mid-job. No proprietary adapter or specialised driver is needed.
Thermals noise power
Normal drilling generates heat at the cutting edges; periodic withdrawal clears swarf and controls temperature. The bit runs quietly in a cordless or corded drill, drawing only the power the motor supplies. No active cooling or duty-cycle limit is specified.
Highlights
- 3/16-inch diameter drills precise holes in multiple materials
- 16-inch length reaches deep or through-thick workpieces
- Multipurpose design tackles wood, metal, plastic and masonry
- ARTU branding signals professional-grade accessory quality
- New condition guarantees full factory performance from first use
Specifications
| Brand | ARTU |
|---|
Questions about this item
How deep can the 16-inch flute drill before chip removal becomes the limit?
The 16-inch overall length gives a usable flute depth of roughly 16 inches, so you can drill that far before you must withdraw to clear chips.
Does the bit run hot enough to need cutting fluid during all-day use?
The steel body dissipates heat normally; for continuous drilling in metal, use cutting fluid to keep temperatures down and extend edge life.
What shank size must my drill chuck accept for this bit to fit?
The 3/16-inch diameter shank fits any standard 3/8-inch or 1/2-inch keyed or keyless chuck that closes to 3/16 inch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
