We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular lithium-ion battery pack for Zebra DS8100 series scanners

ArtisanPower

ArtisanPower Replacement Battery Zebra 8100 Series 2600 mAh 3.7V

SKU CH-YD87-JMY1B

Replacement lithium-ion battery for Zebra DS8100 series scanners, 2600 mAh capacity with 3.7 V output and 9.62 Wh rating

  • Input Voltage3.7
  • ColorBlack
  • Compatible with Zebra DS8100, DS8170 and DS8178 scanners
  • Replaces OEM part numbers BTRY-DS81EAB0E-00, BTRY-ZDS81EAZB0E-00, 81-176890-01 and 71-176890-01
  • 2600 mAh capacity provides 4 % more runtime than original battery
  • 7 V lithium-ion pack delivers 9.62 Wh energy rating
  • Built with performance-grade Japanese cells for maximum cycle life

Direct replacement for Zebra 8100 scanners

This ArtisanPower lithium-ion pack fits DS8100, DS8170, DS8178 and other DS81XX models including the black, white and blue-and-white health-care versions. It matches the OEM part numbers BTRY-DS81EAB0E-00, BTRY-ZDS81EAZB0E-00, 81-176890-01 and 71-176890-01. The 2600 mAh cell delivers 3.7 volts and a 9.62 watt-hour rating.

Higher capacity than the original battery

The pack is rated 4% above the factory Zebra cell, so each charge lasts longer during continuous scanning shifts. It is worth the swap when the original no longer holds a full day of use or when spare packs are needed for multi-shift operations. The Japanese-made cells are selected for maximum cycle life.

Drops into the existing battery bay

No tools or firmware changes are required; the pack uses the same form factor and connector as the OEM unit. It frees up budget otherwise spent on OEM replacements and keeps current cradles and chargers in service. Buyers who need a different voltage or a higher capacity than 2600 mAh should look elsewhere.

Highlights

  • Compatible with Zebra DS8100, DS8170 and DS8178 scanners
  • Replaces OEM part numbers BTRY-DS81EAB0E-00, BTRY-ZDS81EAZB0E-00, 81-176890-01 and 71-176890-01
  • 2600 mAh capacity provides 4 % more runtime than original battery
  • 7 V lithium-ion pack delivers 9.62 Wh energy rating
  • Built with performance-grade Japanese cells for maximum cycle life

Specifications

BrandArtisan Power
Input Voltage3.7
ColorBlack

Questions about this item

Does this battery fit the DS8178 scanner model?

Yes, it is built for the Zebra 8100 series and covers the DS8178 along with the DS8170 and other DS81XX models.

How do I install the battery in my DS8170 scanner?

Open the scanner battery compartment, remove the old pack, insert this 3.7 Volt lithium ion unit with the contacts aligned, then close the latch.

When will the 2600 mAh pack need replacing?

The lithium ion cells are rated for 9.62 Wh; replace the pack when run time drops noticeably below the original 2600 mAh level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.