We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver fluid control valve with digital meter and flexible nozzle

Aro

Aro 635390-2 fluid control valve 1000 psi 4.0 GPM

SKU CH-6C5Q-D6K20

Fluid control valve delivers 4.0 GPM at 1000 psi with digital meter for gear oil, motor oil and transmission fluid

  • Digital meter tracks fluid totals in litres or gallons
  • 0 GPM flow rate handles gear oil, motor oil and transmission fluid
  • 1000 psi operating pressure for demanding lubrication tasks
  • 1/2 in NPTF inlet connects directly to standard supply lines
  • Flexible nozzle allows precise dispensing in tight spaces

Aro 635390-2 Fluid Control Valve

The Aro 635390-2 is a fluid control valve designed for dispensing gear oil, motor oil and transmission fluid. It operates at 1000 psi and delivers a flow rate of 4.0 GPM. The unit includes a fluid control handle with a digital meter that totals in litres or gallons.

Workshop Suitability

This valve suits workshops that need metered dispensing of the listed fluids at the rated pressure and flow. It is not for buyers who require a higher flow rate or a pressure rating above 1000 psi. Facilities needing a different inlet connection or nozzle style should look at other options.

4.0 GPM Flow Rate

The 4.0 GPM flow rate determines how quickly fluid is delivered during each dispense cycle. Match this figure to the service speed your operation requires. If the job demands a significantly faster or slower delivery rate, this valve will not be the correct choice.

Highlights

  • Digital meter tracks fluid totals in litres or gallons
  • 0 GPM flow rate handles gear oil, motor oil and transmission fluid
  • 1000 psi operating pressure for demanding lubrication tasks
  • 1/2 in NPTF inlet connects directly to standard supply lines
  • Flexible nozzle allows precise dispensing in tight spaces

Specifications

BrandARO

Questions about this item

What pump thread size is required to connect the 1/2 in NPTF inlet?

The valve has a 1/2 in NPTF inlet, so the pump or supply line must provide a matching 1/2 in NPTF male thread for a direct seal.

Will a legacy pump rated below 1000 psi still operate this valve?

Yes, the valve operates at pressures up to 1000 psi, so a pump delivering lower pressure will still work as long as flow reaches 4.0 GPM.

How can I verify the digital meter is totalising correctly after installation?

Dispense a known volume such as 15.85 quarts and confirm the display increases by the same amount in quarts or gallons.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.