We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver SFP+ transceiver modules with RJ45 ports side by side

ARENTI

ARENTI SFP+ RJ45 10G 30m 2 Pack 2 in 1 accessory

SKU CH-NGPS-P333G

Two 10G SFP+ to RJ45 copper transceivers reach 30m over Cat6a or Cat7 with auto-negotiation at 1.25, 2.5, 5 or 10GbE

  • Auto-negotiates 1.25, 2.5, 5 and 10 GbE for flexible link speeds
  • Reaches 30 m over Cat6a or Cat7 copper cabling
  • Works with Cisco, Ubiquiti, Mikrotik, Netgear, D-Link, QNAP, TP-Link, Supermicro, Broadcom and other 10G SFP+ gear
  • Hot-pluggable, plug-and-play with no software or configuration required
  • Draws under 2.5 W and operates from 0 to 70 °C

SFP+ RJ45 10G Copper Transceiver Pair

This two-pack provides 10G SFP+ to RJ45 copper transceivers for network equipment with SFP+ ports. Each module auto-negotiates at 1.25, 2.5, 5 or 10 GbE over Cat6a or Cat7 cable. They suit administrators adding 10G copper links to compatible switches, routers or NAS devices without replacing existing SFP+ infrastructure.

Hot-Pluggable SFP+ MSA Modules for Multi-Vendor Gear

The transceivers comply with SFP+ MSA, IEEE 802.3an, IEEE 802.3az, SFF-8431 and SFF-8432, enabling plug-and-play installation in Cisco, Ubiquiti, Mikrotik, Netgear, D-Link, Qnap, TP-Link, Supermicro and Broadcom equipment supporting 10G SFP+. They free SFP+ ports for copper cabling up to 30 metres but do not work with the Ubiquiti US-48-500W switch.

Low-Power Operation Across 0 to 70°C Range

Each module draws under 2.5 W while operating from 0 to 70 °C (32 to 158 °F), maintaining link stability during sustained traffic without active cooling. The hot-pluggable design allows insertion or removal without powering down the host device, supporting continuous operation in data-centre or office environments.

Highlights

  • Auto-negotiates 1.25, 2.5, 5 and 10 GbE for flexible link speeds
  • Reaches 30 m over Cat6a or Cat7 copper cabling
  • Works with Cisco, Ubiquiti, Mikrotik, Netgear, D-Link, QNAP, TP-Link, Supermicro, Broadcom and other 10G SFP+ gear
  • Hot-pluggable, plug-and-play with no software or configuration required
  • Draws under 2.5 W and operates from 0 to 70 °C

Specifications

No published specifications for this item yet.

Questions about this item

How far can these 10G SFP+ modules reach over copper cable?

The transceivers deliver up to 30 metres when used with Cat6a or Cat7 patch cords.

What is the maximum power draw and operating temperature for continuous all-day use?

Each module consumes less than 2.5 watts and is rated for 0 to 70 °C (32 to 158 °F).

Which switch or router ports are required to accept these transceivers?

They plug into any standard 10G SFP+ cage that follows the SFF-8431 and SFF-8432 MSA specifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.