We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple in-ear monitors with zinc alloy shells and detachable cable

ARENTI

ARENTI CCA C10 4BA+1DD Hybrid IEM Purple

SKU CH-ZPA8-HK73M

Wired hybrid IEM with four balanced-armature and one dynamic driver, detachable 0.75 mm 2-pin cable, and zinc-alloy shells for secure fit

  • Rich, detailed treble from four custom 30095+50060 balanced-armature drivers
  • Smooth, cohesive sound across all frequencies via precision crossover tuning
  • Secure, fatigue-free fit shaped by extensive ear-geometry data
  • Detachable 2-pin .75 mm cable allows easy replacement or upgrade
  • Lightweight yet tough zinc-alloy and resin shell resists daily wear

Hybrid driver IEM for critical listening

The ARENTI CCA C10 uses a 4BA+1DD hybrid configuration with four customised 30095 and 50060 balanced-armature units plus a dynamic driver. A precision crossover assigns each unit a dedicated frequency band for smooth three-frequency transitions. The result is extended high-frequency density, full sweet mid-high vocals and a naturally clear soundstage suited to monitoring and high-fidelity playback.

Passive isolation with no active circuitry

As a wired in-ear monitor the C10 requires no battery, produces no self-noise and draws zero power from the source device. The acoustic seal created by the ergonomic shell provides passive noise attenuation for stage or commuter use. Without active electronics there is no thermal load, no charging cycle and no latency introduced by digital processing.

Zinc-alloy shell with detachable 2-pin cable

The lightweight zinc-alloy and resin housing is shaped from extensive auricle data for long-session comfort and durability. A standard 0.75 mm 2-pin connector allows cable replacement, upgrade or alternative terminations for long-term device compatibility. The package omits a microphone, so users needing inline calls or voice control will require a separate solution.

Highlights

  • Rich, detailed treble from four custom 30095+50060 balanced-armature drivers
  • Smooth, cohesive sound across all frequencies via precision crossover tuning
  • Secure, fatigue-free fit shaped by extensive ear-geometry data
  • Detachable 2-pin .75 mm cable allows easy replacement or upgrade
  • Lightweight yet tough zinc-alloy and resin shell resists daily wear

Specifications

No published specifications for this item yet.

Questions about this item

How do I attach the 2-pin .75 mm detachable cable without bending the pins?

Align the two pins with the sockets on each earpiece and press straight in until you feel a click; forcing the connector at an angle is the step most people get wrong and can bend the pins.

Which part will need replacement first with daily use?

The detachable cable is the wear item; the 2-pin .75 mm connectors and wire insulation degrade from repeated flexing long before the zinc-alloy shells or the four 30095 and 50060 balanced-armature drivers.

At what point does comfort become the limiting factor during long sessions?

The ergonomic shells are shaped from auricle data to distribute pressure evenly, so fatigue from fit rarely appears first; the practical limit is usually cable microphonics or ear-canal moisture after several hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.