ARENTI 2 in 1 Accessory KVM Cable 16ft 2 Pack

16 ft dual-head KVM cable pack

Two integrated HDMI-and-USB cables extend the reach between a host computer and a compatible HDMI KVM switch. Each 16 ft run carries video, keyboard and mouse signals in a single sheath, removing the need for separate video and data leads. The USB pigtail draws power and transmits input data from the host side. The cables also function as standard HDMI leads when the USB connection is not required.

4K at 30 Hz ceiling and five-metre limit

The cable set is rated for the 4K 30 Hz signalling used by the referenced HDMI KVM switches. Longer runs beyond the supplied 5 metre length are not supported by this design, so distances greater than 16 ft would require an active extender or a different topology. USB 2.0 bandwidth governs the keyboard and mouse channel, limiting high-speed peripheral use. No higher refresh rate or resolution guarantee is stated.

Replaces short factory cables for distant racks

The typical bundled KVM cable is only 4 ft, so this 16 ft pair is intended for setups where the switch sits farther from the host — such as server cabinets, under-desk routing or cross-room installations. The upgrade is worthwhile when the stock leads cannot span the gap without tension or adapters. It does not address installations needing more than two host connections or cable runs longer than 16 ft.