ARENTI
ARENTI 2 in 1 Accessory for Dell Inspiron 16 7630 7635 16.0 inch 1920x1200 IPS 30pin Non-OLED
Replacement 16.0 inch 1920x1200 IPS touchscreen digitizer assembly with 30-pin connector for compatible Dell Inspiron 2-in-1 models
- Compatible with Dell Inspiron 16 7630 7635 2-in-1 models
- 0 inch IPS panel at 1920x1200 resolution
- 30-pin EDP connector fits original laptop socket
- 60 Hz refresh rate for smooth visuals
- 3-month warranty covers the replacement assembly
16.0 inch IPS LCD touch digitizer assembly
This replacement assembly fits Dell Inspiron 16 7630 and 7635 2 in 1 models with part numbers P128F, P128F001 or P128F003. It provides a 1920x1200 IPS panel with a 30 pin EDP connector and is not compatible with OLED screens.
Verify your laptop model
Confirm the exact model on the bottom of your device and match it to P128F, P128F001 or P128F003 before ordering. The connector must be a 30 pin EDP type and the panel must be non OLED. Professional installation skill is required.
Low power 60 Hz panel runs cool and silent
The 60 Hz IPS display draws minimal power and generates little heat during normal use. No moving parts mean completely silent operation. Thermals stay within laptop design limits without extra cooling.
Highlights
- Compatible with Dell Inspiron 16 7630 7635 2-in-1 models
- 0 inch IPS panel at 1920x1200 resolution
- 30-pin EDP connector fits original laptop socket
- 60 Hz refresh rate for smooth visuals
- 3-month warranty covers the replacement assembly
Specifications
No published specifications for this item yet.
Questions about this item
Does the replacement panel come with the top bezel and hinges, or is it the bare LCD and digitizer only?
The assembly includes the 16.0 inch 1920x1200 IPS LCD and touch digitizer bonded together with the 30-pin EDP flex attached; the top cover, hinges, webcam bracket and adhesive strips are not included and must be reused from the original Dell Inspiron 16 7630 or 7635 chassis.
My Inspiron 16 7630 carries the P128F003 part number — will this panel match the 30-pin connector and mounting points exactly?
Yes, the unit is built for the P128F, P128F001 and P128F003 service tags used on the non-OLED 16.0 inch 1920x1200 IPS models, so the 30-pin EDP connector and screw-hole pattern line up with the factory panel.
After fitting the screen, will the 60 Hz refresh rate and 1920x1200 resolution work automatically without a driver install?
The panel is a direct hardware match for the original 60 Hz 1920x1200 IPS display, so Windows detects the native resolution and refresh rate immediately; no additional driver is required for basic operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
