ARENTI
ARENTI 2 in 1 accessory 8MP POE IP camera 2.8mm 110°
An 8MP POE IP camera with a 2.8mm lens, 110° view, AI human and vehicle detection, built-in microphone and full-metal housing
- 8MP resolution delivers sharp detail for clear identification
- 110° wide-angle lens with 2.8mm focal length covers large areas
- AI human and vehicle detection reduces false alerts
- Built-in microphone records audio to NVR or software
- Single PoE cable supplies both power and data
8MP POE IP Camera for Outdoor Surveillance
This ARENTI camera captures 8MP resolution video through a 2.8mm fixed lens that provides a 110-degree viewing angle. A 1/2.8-inch CMOS sensor improves low-light performance compared to smaller sensors. Power over Ethernet delivers both power and data over a single cable for simpler installation.
Replaces Standalone Analog
Upgrading is worthwhile when you need AI-based human and vehicle detection that reduces false alerts and adjustable detection zones. The built-in microphone adds one-way audio recording to your NVR or third-party software. Colour night vision extends useful footage after dark without extra illuminators.
Check NVR Compatibility and Cabling Before Ordering
Verify that your recorder supports the ONVIF protocol for full integration. Ensure you have a PoE switch or injector capable of powering the camera if the NVR lacks PoE ports. Confirm that a single Ethernet run reaches each mounting location within standard cable length limits.
Highlights
- 8MP resolution delivers sharp detail for clear identification
- 110° wide-angle lens with 2.8mm focal length covers large areas
- AI human and vehicle detection reduces false alerts
- Built-in microphone records audio to NVR or software
- Single PoE cable supplies both power and data
Specifications
No published specifications for this item yet.
Questions about this item
What mounting hardware is needed for the turret dome camera?
The camera has a full metal case designed for outdoor wall or ceiling mounting; use the supplied bracket and screws to secure it to a solid surface.
How do I install the 2.8 mm PoE camera and what step is often missed?
Run a single Ethernet cable to the camera for both power and data, then add the device in an ONVIF-compatible NVR; the step often missed is enabling the RTSP stream in the NVR settings.
What maintenance will the 8 MP camera need over time?
Clean the dome lens periodically to keep the 110° view clear, check the PoE cable seals for water ingress, and apply any firmware updates released by the manufacturer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



