We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black adapter with USB-C cable and blue LED indicator

ARENTI

ARENTI 2 in 1 accessory 10Gbps USB 3.2 Gen 2 SATA NVMe

SKU CH-TPJ8-RAWEH

Connects a 2.5 SATA or M.2 NVMe drive via USB 3.2 at 10Gbps with tool-less installation

  • Tool-less design enables quick drive swaps without tools
  • USB 3.2 Gen 2 delivers up to 10 Gbps transfer speeds
  • Supports one 2.5 SATA or M.2 NVMe drive at a time
  • UASP and TRIM support keeps SSD performance consistent
  • Blue activity LED shows drive status at a glance

Dual-drive USB adapter for SATA and NVMe SSDs

This adapter lets you connect one 2.5-inch SATA SSD or HDD or one M.2 SATA or NVMe SSD to a USB 3.2 Gen 2 port. It is aimed at technicians and power users who need fast, tool-less access to bare drives for cloning, recovery or temporary storage expansion.

Check host port and drive compatibility before

Your computer must provide a USB 3.2 Gen 2 connection running at 10 Gbps to reach the quoted transfer ceiling; slower ports will work but limit throughput. Only one drive can be installed at a time, so the adapter cannot bridge a 2.5-inch drive and an M.2 drive simultaneously. Verify that your M.2 module uses a SATA or NVMe interface, as other keyings are not supported.

Thermals noise and power in normal use

The open tool-less design relies on passive convection, so drive temperature will follow the workload and ambient conditions without active cooling. No fan is present, meaning acoustic output is limited to the drive itself. Power is drawn entirely from the USB bus, so the host port must supply enough current for the attached SSD or HDD during sustained transfers.

Highlights

  • Tool-less design enables quick drive swaps without tools
  • USB 3.2 Gen 2 delivers up to 10 Gbps transfer speeds
  • Supports one 2.5 SATA or M.2 NVMe drive at a time
  • UASP and TRIM support keeps SSD performance consistent
  • Blue activity LED shows drive status at a glance

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter include both the 2.5 inch SATA and M.2 NVMe cables or must they be purchased separately?

The adapter has built-in connectors for one 2.5 inch SATA drive or one M.2 SATA or NVMe drive; no extra cables are required.

Should I choose the 2.5 inch SATA slot or the M.2 slot for a 10 Gbps NVMe drive?

Use the M.2 slot for an NVMe SSD; the 2.5 inch slot only accepts SATA drives and the two slots cannot be used at the same time.

Will I see the full 10 Gbps speed when the adapter is plugged into a USB 3.2 Gen 2 port?

The 10 Gbps headline rate is the interface maximum; actual throughput depends on the installed drive and the host controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.