We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver ATX power supply with 135mm fan and 1.5m US plug cable

ARENTI

ARENTI 2 in 1 Accessories 1600W 87+ Gold 110V 1.5m US Plug

SKU CH-6Y1N-PVMMM

A 1600W ATX power supply with 87+ Gold efficiency, 135mm quiet fan, and cables for up to eight graphics cards

  • 1600 W output powers up to 12 graphics cards
  • 87 % efficiency at 110 V cuts electricity cost
  • 135 mm fan reduces noise while keeping components cool
  • 5 m US plug cable lets you connect without an adapter
  • Dual 12 V rails with full protection guards hardware

High-wattage ATX supply for multi-GPU rigs

This 1600W ATX unit delivers 87% efficiency at 110V and 90% at 220V with an 87+ Gold rating. It is built for systems that need to power up to eight graphics cards from a single source. The dual 12V rail design distributes load across demanding mining or compute configurations. A 1.5m US plug cable is included for direct wall connection.

135mm fan cooling with 110V native operation

A 135mm noise-reduction fan manages thermals across the SGCC steel housing measuring 165 by 150 by 85mm. The power supply operates natively at 110V across the 100 to 240V range without an external inverter. Active PFC correction maintains stable input current during sustained high-draw workloads. An I/O switch provides manual on/off control at the rear.

Modular-style cable reaches for full-tower builds

The fixed cable set includes one 20+4 pin motherboard connector and one 4+4 pin CPU connector, both exposed at 580mm. Eight 6+2 pin PCIe leads reach 630mm, six more reach 780mm, and two reach 880mm for distant GPU slots. Four SATA connectors sit at 580mm and four more at 730mm, while four Molex 4-pin leads extend to 880mm. Builders needing more than eight PCIe devices or a different form factor should look elsewhere.

Highlights

  • 1600 W output powers up to 12 graphics cards
  • 87 % efficiency at 110 V cuts electricity cost
  • 135 mm fan reduces noise while keeping components cool
  • 5 m US plug cable lets you connect without an adapter
  • Dual 12 V rails with full protection guards hardware

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 20+4 pin motherboard connector and what step do people often miss?

Connect the 580 mm 20+4 pin cable to the motherboard and the 4+4 pin CPU cable to the CPU socket, then attach the required 6+2 pin PCI-E cables to each graphics card; the step often missed is seating every connector fully until the latch clicks.

What maintenance or replacement will this 1600W unit need later?

The 135 mm cooling fan is the only moving part; plan to clean dust from its blades and heatsink every few months and replace the fan if bearing noise appears.

What limit appears first when running this 110V supply at full 1600W load continuously?

At 110V input the efficiency is 87 percent, so sustained full load produces the most heat inside the ATX housing and the 135 mm fan becomes the thermal bottleneck before any electrical limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.