We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SlimSAS SFF-8654 to dual MiniSAS SFF-8643 cable, one metre

Areca Technology Corp.

Areca Technology Corp. SlimSAS SFF-8654 to MiniSAS SFF-8643 infiniband cable 1 meter

SKU CH-BSKD-3WV7S

Connects a SlimSAS 8i port to two Mini-SAS HD 4i connectors using 32 AWG wire in a one-metre cable

  • 1 meter length fits tight server chassis
  • SlimSAS SFF-8654 connects to modern controllers
  • Dual Mini-SAS HD SFF-8643 links to existing backplanes
  • 32 AWG wire gauge supports SAS signal integrity
  • Factory-built to industrial specification for demanding applications

Areca SlimSAS to Mini-SAS HD Cable

This one-metre cable connects a SlimSAS 8i SFF-8654 port to two Mini-SAS HD 4i SFF-8643 connectors. It suits storage builders linking modern backplanes or controllers that use the SlimSAS interface to legacy SAS expanders or enclosures.

Dual 4i breakout doubles connection options

The SFF-8654 end carries eight lanes which split into two independent four-lane SFF-8643 plugs. This lets a single controller port serve two separate SAS devices or enclosures without an extra expander card.

32-gauge wire limits reach and lane count

The thin 32 AWG conductors support the stated one-metre length for SAS signalling but will not sustain longer runs or higher lane aggregates. Builders needing extended distances or wider links must select a heavier-gauge assembly.

Highlights

  • 1 meter length fits tight server chassis
  • SlimSAS SFF-8654 connects to modern controllers
  • Dual Mini-SAS HD SFF-8643 links to existing backplanes
  • 32 AWG wire gauge supports SAS signal integrity
  • Factory-built to industrial specification for demanding applications

Specifications

No published specifications for this item yet.

Questions about this item

Will the 32 AWG conductors need periodic replacement under normal use?

The 32 AWG wiring is built to industrial specification and does not have a scheduled replacement interval.

What throughput limit appears first during continuous operation?

The cable carries SAS signals through an SFF-8654 8i connector to two SFF-8643 4i connectors without an active repeater, so the passive copper length sets the practical distance ceiling.

Does the cable generate noticeable heat or noise when run all day?

As a passive copper assembly it produces no audible noise and negligible heat during sustained operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.