We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled black cable with right-angle 2-pin and DC connectors, 12 inches 30cm

ARCTIC

ARCTIC Z CAM S6 Power Cable Ninja V DC Jack 2 Pin Right Angle Upward 12 inches 30cm

SKU CH-C8MK-RVWY7

Powers Atomos Shinobi, Ninja V or Portkeys BM5 monitors from Z CAM E2 S6/F6 2-pin output with an upward right-angle plug that clears the remote port

  • Powers Atomos Ninja V and Portkeys BM5 from Z CAM E2 S6/F6 2 Pin Output
  • Upward right-angle 2-pin plug avoids blocking the E2 remote port
  • Right-angle DC jack reduces strain on monitor power input
  • 12 inch (30 cm) length keeps rig tidy and manageable
  • Each cable tested for short circuits and breakdown before shipping

Compatible Devices and Purpose

This cable powers an Atomos Shinobi, Ninja V or Portkeys BM5 monitor from the Z CAM E2 S6 or F6 two-pin power output. It is built for video professionals who need a reliable link between these specific cameras and monitors. It will not suit users whose camera lacks the matching two-pin port or whose monitor uses a different DC input.

Connector Geometry and Length

Plug A is an upward-facing right-angle two-pin male that clears the remote port on the E2 body. Plug B is a right-angle DC male. The cable measures 12 inches, approximately 30 cm, and custom lengths are available on request.

Sustained Use Reliability

Every unit is tested for short-circuit and potential-breakdown faults before it leaves the workshop. The right-angle strain relief on both ends reduces cable fatigue during long shoots, and a defective cable will be replaced promptly.

Highlights

  • Powers Atomos Ninja V and Portkeys BM5 from Z CAM E2 S6/F6 2 Pin Output
  • Upward right-angle 2-pin plug avoids blocking the E2 remote port
  • Right-angle DC jack reduces strain on monitor power input
  • 12 inch (30 cm) length keeps rig tidy and manageable
  • Each cable tested for short circuits and breakdown before shipping

Specifications

No published specifications for this item yet.

Questions about this item

How does the 12-inch length affect cable routing between the Z CAM E2 S6/F6 and a monitor?

At 12 inches the cable reaches from the camera 2-pin output to a monitor DC input with minimal slack, keeping the rig tidy on a cage or gimbal.

What does the DC jack connection limit in practice?

The right-angle DC plug carries power only, so video, tally or remote signals must run on separate cables.

Will the upward right-angle 2-pin plug clear the remote port on my E2 body?

Yes, the upward angle routes the cable away from the adjacent remote port, leaving it free for a controller or accessory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.