ARCTIC
ARCTIC L200EBS-01 200W Power Supply 2 in 1 Accessory
Replacement 200W power supply with 6-pin and dual 4-pin connectors for Dell Optiplex and Inspiron desktops
- 200W output powers demanding Dell OptiPlex and Inspiron desktops
- Replaces Dell 5TVM5 and multiple OEM part numbers for easy swap
- 100-24V 3.2A input works with standard mains supplies
- Triple 12V rails deliver 16.5A, 16.5A and 14A for stable loads
- Includes 6-pin and dual 4-pin connectors for direct installation
200W Replacement Power Supply
This 200W unit replaces the original Dell power supply in compatible OptiPlex, Inspiron and Vostro desktops. It accepts 100-24V input at 3.2A and delivers up to 200W total output. The supply is built for owners of listed Dell models who need a direct swap for a failed or ageing unit.
Installation and connector check
The supply uses a 6-pin connector plus two 4-pin connectors; verify that the unit pictured matches the one in your chassis before fitting. Mismatched connector layouts are the most common reason a replacement will not seat or power the board. No tools beyond a screwdriver are typically required for the swap.
Output capacity and limits
The +12V rails provide 16.5A on each of two outputs and 14A on a third, with a combined 12V maximum of 16.5A and a 200W ceiling. This covers the factory specification of the supported OptiPlex 3050, 3060, 3080, 5050, 5060, 5080, 5090, 7050, 7060, 7080, 7090 and Inspiron 3470, 3667, 3668, 3669, Vostro 3668, 3671, 3681 systems. Systems that demand more than 200W or different connector pin-outs cannot use this supply.
Highlights
- 200W output powers demanding Dell OptiPlex and Inspiron desktops
- Replaces Dell 5TVM5 and multiple OEM part numbers for easy swap
- 100-24V 3.2A input works with standard mains supplies
- Triple 12V rails deliver 16.5A, 16.5A and 14A for stable loads
- Includes 6-pin and dual 4-pin connectors for direct installation
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the L200EBS-01 200W power supply is operating correctly after installation?
After fitting the unit, power on the Dell Optiplex or Inspiron system. Stable boot and sustained operation under load confirm the +12VA1, +12VA2 and +12VB rails are delivering up to 16.5 A, 16.5 A and 14 A respectively within the 200 W total limit.
What is included with the L200EBS-01 200W power supply and what must be purchased separately?
The box contains 1× L200EBS-01 power supply equipped with a 6-pin connector and two 4-pin connectors. No additional cables, mounting screws or adapters are supplied; reuse the original hardware from the Dell chassis.
Which replacement part number should I select for my Dell Optiplex 3060 or Inspiron 3470?
Choose the L200EBS-01 / H200EBS-01 unit listed as a direct replacement for Dell part numbers 5TVM5, VFXXF, PA-2201-3DB, K92TW, HJ34C, KMJP5, R9JGD, R4T90 and OK92TW; all map to the same 200 W specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



