ARCTIC
ARCTIC BioniX P120 120 mm Case Fan Red
A 120 mm pressure-optimised case fan with PWM sharing technology, 200–2100 RPM speed range, 67.56 CFM airflow and 0.45 Sone noise level in red
- High static pressure for dense radiators and filters
- PWM sharing runs multiple fans from one header
- Motor cuts vibration to five percent of a standard DC design
- Speed range 200 to 2100 RPM for silent idle and full load
- Airflow 67.56 CFM at peak speed with 0.45 sone noise
Static-Pressure Optimised 120 mm Fan
The ARCTIC BioniX P120 is a 120 mm case fan designed for builders who need focused airflow through restrictive spaces such as radiators or dense mesh. Its pressure-optimised blade geometry delivers a concentrated airstream rather than wide dispersion.
PWM Sharing Technology and Low-Vibration Motor
PWM Sharing Technology lets multiple fans follow a single control signal so they spin up or stop together across the 200 to 2100 RPM range. A sinusoidal motor design cuts vibration to roughly five percent of a conventional DC motor for quieter operation.
67.56 CFM Airflow at 2100 RPM
At maximum speed the fan moves 67.56 CFM (114.79 m³/h) while producing only 0.45 Sone of noise. Buyers who need higher volumetric flow for open-air cooling should consider a different blade profile.
Highlights
- High static pressure for dense radiators and filters
- PWM sharing runs multiple fans from one header
- Motor cuts vibration to five percent of a standard DC design
- Speed range 200 to 2100 RPM for silent idle and full load
- Airflow 67.56 CFM at peak speed with 0.45 sone noise
Specifications
No published specifications for this item yet.
Questions about this item
What does the 4‑pin PWM interface let me control on this fan?
The 4‑pin PWM connector lets the motherboard regulate speed from 200 to 2100 RPM and, with PWM Sharing Technology, synchronises multiple fans from a single header.
What mounting holes does the 120 mm frame use?
The 120 mm square frame uses the standard four‑corner screw pattern found on most case fan mounts and radiators.
How do I connect several BioniX P120 fans so they run together?
Plug the first fan into the motherboard PWM header, then daisy‑chain the remaining fans using the PST cables so all units follow one control signal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



