We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey 120 mm case fan with square frame and centred rotor

ARCTIC

ARCTIC BioniX P120 120 mm Case Fan Grey

SKU CH-JEF6-QNCGE

Pressure-optimised 120 mm case fan runs at 200–2100 RPM, delivers 67.56 CFM airflow and 0.45 Sone noise with PWM sharing technology

  • High static pressure cools dense heatsinks and radiators effectively
  • PWM Sharing Technology syncs multiple fans from one signal for simple control
  • Motor runs at just 0.45 Sone for near-silent operation
  • Wide 200–2100 RPM range adapts airflow to any load
  • Delivers 67.56 CFM / 114.79 m³/h at full speed

Pressure-Optimised 120 mm Fan

The ARCTIC BioniX P120 is a 120 mm case fan engineered for high static pressure, making it suitable for radiators, dense heatsinks and restrictive chassis layouts. Its PWM Sharing Technology lets multiple fans follow a single control signal so they start, stop and ramp together. The unit is supplied new in a neutral grey finish.

Thermals, Noise and Power Draw

At the maximum 2100 RPM the fan delivers 67.56 CFM (114.79 m³/h) while registering only 0.45 Sone, so airflow remains strong without becoming audible. The sinusoidal motor design reduces vibration to roughly five percent of a conventional DC motor, keeping case resonance low across the 200–2100 RPM range. Four-pin PWM control allows the motherboard to idle the fan at 200 RPM when cooling demand drops.

Upgrade Context

Builders replacing stock case fans that struggle with restricted intakes or radiator stacks will notice steadier airflow at lower noise. The jump is worthwhile when the existing fans cannot maintain pressure through dust filters or tight fin arrays, or when synchronous speed control across several fans is desired. Users who only need basic airflow in an open mesh chassis may not benefit from the pressure-focused blade profile.

Highlights

  • High static pressure cools dense heatsinks and radiators effectively
  • PWM Sharing Technology syncs multiple fans from one signal for simple control
  • Motor runs at just 0.45 Sone for near-silent operation
  • Wide 200–2100 RPM range adapts airflow to any load
  • Delivers 67.56 CFM / 114.79 m³/h at full speed

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 4-pin PWM connector and what step is often missed?

Plug the 4-pin connector into the motherboard header, then enable PWM control in BIOS so the 200–2100 RPM range and PST synchronisation actually work.

What maintenance will this fan need over time?

Dust the blades and frame periodically; the sinusoidal motorisation keeps vibration at roughly 5 % of a conventional DC motor, so bearing wear stays minimal.

What limit appears first during sustained high-speed operation?

At 2100 RPM the fan moves 67.56 CFM (114.79 m³/h) at 0.45 Sone, so acoustic output is the practical ceiling before airflow plateaus.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.