ARCTIC
ARCTIC 48V 2A PoE Power Adapter 2 in 1 accessory
48V 2A PoE power adapter supplies stable DC power to OOSSXX 8-port NVR systems with overload and short-circuit protection
- Stable 48V 2A output keeps OOSSXX 8-port PoE NVR running reliably
- Overload, over-voltage, over-current and short-circuit protection guards connected devices
- Compact ABS housing with fire-resistant construction improves safety
- Plug-and-play design enables quick setup without complex configuration
- Universal AC 100-240V input suits mains supplies worldwide
Purpose and compatibility
This ARCTIC power adapter is a 2-in-1 accessory built for OOSSXX 8-port PoE NVR security camera systems. It converts AC 100-240V mains input into a steady DC 48V 2A output that powers the recorder and connected cameras around the clock.
Replacing an old or failed supply
Swap this unit in when the original NVR brick has died, buzzes under load or cannot sustain the 48V rail during night-vision spikes. The jump is worth it if your current adapter lacks overload, over-voltage, over-current and short-circuit safeguards, because those protections extend the life of every camera on the PoE bus.
Pre-installation checklist
Verify that your NVR is an OOSSXX 8-port PoE model before ordering; the barrel connector and voltage are matched to that hardware only. Confirm the installation site can accept a standard AC plug between 100 and 240V and that the adapter’s ABS housing has clearance for passive cooling. No extra cables or configuration are required beyond plugging it in.
Highlights
- Stable 48V 2A output keeps OOSSXX 8-port PoE NVR running reliably
- Overload, over-voltage, over-current and short-circuit protection guards connected devices
- Compact ABS housing with fire-resistant construction improves safety
- Plug-and-play design enables quick setup without complex configuration
- Universal AC 100-240V input suits mains supplies worldwide
Specifications
No published specifications for this item yet.
Questions about this item
What AC input voltage range does this 48V 2A PoE adapter accept for the OOSSXX 8 port NVR?
The adapter accepts AC 100-240V input, converting it to DC 48V 2A output for the OOSSXX 8 port POE NVR system.
How do I connect this PoE power adapter to the OOSSXX NVR, and what common step is missed?
Plug the adapter into a 100-240V AC outlet and connect the DC output to the NVR power port; the step often missed is verifying the NVR powers on before mounting cameras.
When should I replace this 48V 2A PoE adapter for the OOSSXX security system?
Replace the adapter if the NVR shows intermittent power loss, the unit becomes unusually hot, or the overload protection triggers repeatedly during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
