We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black Mini-SAS SFF-8087 to four SATA 90° breakout cables .5m

ARCTIC

ARCTIC 2-Pack Mini-SAS SFF-8087 to 4x SATA 90° .5m 2 in 1 accessory

SKU CH-63YC-K8HMA

Two 0.5 m SFF-8087 to 4× SATA 90° breakout cables connect a 36-pin SAS controller to four drives at up to 6 Gb/s per drive

  • Connect four drives per cable with SFF-8087 36-pin breakout
  • 90-degree right-angle SATA plugs fit tight chassis spaces
  • Locking latch on Mini-SAS end secures link to RAID controller
  • 6 Gb/s per drive throughput for fast storage arrays
  • Labelled cables and braided 0.5 m length simplify cable routing

SAS breakout for RAID controllers

This two-pack provides Mini-SAS SFF-8087 to 4x SATA breakout cables for connecting a SAS HBA or PCIe RAID controller to up to four SATA drives. Each cable carries a 36-pin male Mini-SAS connector with a locking latch on the host side and four labelled SATA plugs with 90-degree right-angle ends on the target side. The 0.5 metre length suits compact chassis where longer runs would add clutter.

Four drives per cable at 6 Gb/s

Each assembly supports up to 6 Gb/s per SATA lane, giving four independent 6 Gb/s paths from a single Mini-SAS 8087 port. The forward breakout topology is designed for controller-to-drive or controller-to-backplane links; the supplier notes that plugging the Mini-SAS end directly into a backplane will not work. Two cables in the pack allow eight drives to be served from two controller ports.

Thin braided cables with labelled ends

The cables use a thin, tape-and-braid weave that resists kinking and eases routing in tight drive cages. Colour-coded or printed labels on the four SATA connectors simplify identification during installation or maintenance. The 90-degree SATA plugs reduce strain on drive ports and keep cable profiles low against backplanes or drive brackets.

Highlights

  • Connect four drives per cable with SFF-8087 36-pin breakout
  • 90-degree right-angle SATA plugs fit tight chassis spaces
  • Locking latch on Mini-SAS end secures link to RAID controller
  • 6 Gb/s per drive throughput for fast storage arrays
  • Labelled cables and braided 0.5 m length simplify cable routing

Specifications

No published specifications for this item yet.

Questions about this item

Will the .5 m SFF-8087 cable reach drives in a full-height server chassis alongside my existing backplane?

The .5 metre length suits compact enclosures; measure from your controller to the furthest drive bay before ordering.

How can I verify each of the four SATA links is running at 6 Gb/s after connecting the breakout?

Check the controller BIOS or OS disk utility — each drive should report a 6 Gb/s negotiated speed.

Does the 2-pack include mounting brackets or only the labelled SFF-8087 to 4× SATA cables?

Only the two labelled breakout cables are supplied; brackets or drive trays must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.