We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red coiled sync cable with straight 9-pin and 3.5mm plugs, 50 cm long

ARCTIC

ARCTIC 2 in 1 Accessory Timecode Sync Cable RED Komodo V-RAPTOR 8K 3.5mm to 9 Pin 50 cm

SKU CH-VJ2F-VJ1CY

A 50 cm timecode sync cable linking Tentacle Sync generators to RED Komodo and V-RAPTOR 8K cameras via a 3.5 mm jack and 9-pin ODU-compatible connector

  • Sends timecode from Tentacle Sync generators to RED cameras
  • Straight 9-pin male connector fits ODU-compatible camera ports
  • Neutrik 3.5 mm mini-jack ensures secure generator link
  • 50 cm length keeps rigging tidy on set
  • Built for RED Komodo and V-RAPTOR 8K workflows

Timecode Sync for RED Cameras

This 2 in 1 accessory connects Tentacle Sync generators to RED Komodo and V-RAPTOR 8K cameras. It carries timecode from the generator to the camera's EXT port for frame-accurate synchronisation. The cable suits production crews who need reliable timecode ingest on set. It is not for users without a compatible timecode generator or cameras lacking the 9-pin EXT interface.

3.5mm to 9-Pin ODU Wiring

Plug A is a straight 9-pin male connector compatible with ODU sockets on the camera side. Plug B is a Neutrik 3.5mm 1/8'' mini jack that mates with Tentacle Sync output. The 50 cm length keeps the link tidy on rigs while allowing enough slack for camera movement. Builders needing a longer run or a different connector pinout will need another cable.

Stable Signal Over 50 cm

The short run minimises signal degradation during extended takes. Neutrik and ODU-compatible contacts maintain a secure connection under vibration. The assembly is built for daily production use from March 2026 onward. It does not amplify or regenerate timecode, so the source generator must drive the line adequately.

Highlights

  • Sends timecode from Tentacle Sync generators to RED cameras
  • Straight 9-pin male connector fits ODU-compatible camera ports
  • Neutrik 3.5 mm mini-jack ensures secure generator link
  • 50 cm length keeps rigging tidy on set
  • Built for RED Komodo and V-RAPTOR 8K workflows

Specifications

No published specifications for this item yet.

Questions about this item

How long can the 50 cm cable reach between the timecode generator and the camera?

The cable measures 50 cm, giving a half-metre run from a Tentacle Sync unit to the RED Komodo or V-RAPTOR 8K EXT port.

Does the 3.5 mm Neutrik plug or the 9-pin ODU connector generate heat during continuous recording?

The passive cable carries only timecode signals, so neither connector produces noticeable heat during all-day operation.

Which timecode generator is required to use this cable with the RED camera?

A Tentacle Sync or compatible generator with a 3.5 mm output is needed to feed timecode into the cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.