We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black AC adapter brick with 3-pin DIN connector and 120VAC plug

ARCTIC

ARCTIC 2 in 1 Accessory AC Adapter 18.5V 3-Pin for Behringer Xenyx 502 802 1002

SKU CH-4A13-4CGG7

Replacement 18.5 V AC adapter with 3-pin DIN connector powers Behringer Xenyx 502, 802 and 1002 mixers and includes overload protection

  • Powers Behringer Xenyx 502, 802, 1002 and Eurorack mixers
  • 5 VAC dual-rail output at 500 mA matches mixer requirements
  • Pure copper wiring with overcurrent, overvoltage, overload and short-circuit protection
  • 4 ft AC input lead and 6.2 ft 3-pin DIN output cable for flexible placement
  • Mini 3-pin DIN connector (pins 1 and 3 at 18 V, pin 2 ground) ensures secure fit

Replacement AC Adapter for Behringer Xenyx Mixers

This replacement AC adapter powers compatible Behringer Xenyx mixers including the 502, 802 and 1002 models. It also supports the UB, Q and Eurorack FX-18B-MP3 series. The unit plugs into a standard mains outlet and connects via a 3-pin DIN connector. It is designed for musicians and home-studio owners who need a reliable spare or replacement power supply.

Output Rating and Cable Reach

The adapter delivers 18.5VAC at 500mA with an 18VA rating from a 120VAC 60Hz input. A 4-foot input cable and a 6.2-foot output cable give enough reach for typical desktop or rack setups. Pure copper wiring and built-in overcurrent, overvoltage, overload and short-circuit protection maintain stable, interference-free operation. Installations needing a different input voltage or higher current capacity cannot use this adapter.

Mini 3-Pin DIN Connector Pinout

The round 3-pin DIN plug uses pins 1 and 3 for 18V and pin 2 for ground. This pinout matches the standard connector required by the listed Behringer mixers. Verifying that the target device uses the same 3-pin arrangement is the single specification that decides whether this adapter is the correct part.

Highlights

  • Powers Behringer Xenyx 502, 802, 1002 and Eurorack mixers
  • 5 VAC dual-rail output at 500 mA matches mixer requirements
  • Pure copper wiring with overcurrent, overvoltage, overload and short-circuit protection
  • 4 ft AC input lead and 6.2 ft 3-pin DIN output cable for flexible placement
  • Mini 3-pin DIN connector (pins 1 and 3 at 18 V, pin 2 ground) ensures secure fit

Specifications

No published specifications for this item yet.

Questions about this item

Will this 18.5 VAC adapter run my Behringer Xenyx 502 alongside my existing 120 VAC studio gear?

Yes, the adapter accepts 120 VAC 60 Hz input and delivers 18.5 VAC at 500 mA through the 3-pin DIN connector, matching the Xenyx 502 power requirement.

How can I confirm the adapter is supplying the correct 18.5 VAC output after I plug it in?

Measure pins 1 and 3 on the mini 3-pin DIN connector with a multimeter set to AC volts; you should read 18.5 VAC between those pins while pin 2 is ground.

What cables come in the box and is a mains lead included?

The unit ships with a 4-foot input AC gauge plug cable and a 6.2-foot output cable terminated in the mini 3-pin DIN connector; no extra mains lead is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.