We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small silver transceivers with RJ45 ports and latch rings

ARCTIC

ARCTIC 2 in 1 accessory 4 pack 10GBase-T SFP+ transceiver

SKU CH-JSKQ-QGR11

Four 10GBase-T SFP+ copper transceivers supporting 1.25, 2.5, 5 and 10Gb/s over CAT6a or CAT7 up to 30m

  • Works with Cisco, Netgear, Ubiquiti and other open switches
  • Supports 1.25, 2.5, 5 and 10 Gb/s over CAT6a or CAT7 up to 30 m
  • Hot-pluggable with 90-degree ring latch for quick install or removal
  • Each module tested on multiple switch brands before shipping
  • Four transceivers in one pack for multi-port deployments

10GBase-T SFP+ Copper Transceiver Pack

This pack contains four hot-pluggable SFP+ transceivers with copper RJ-45 connectors. Each module supports 1.25, 2.5, 5 and 10 Gb/s data rates over Cat6a or Cat7 cabling up to 30 metres. Network engineers and integrators use them to add 10GBase-T ports to compatible switches and routers.

Check switch port compatibility before ordering

Verify that your switch or router accepts third-party SFP+ modules and lists 10GBase-T copper transceivers in its supported hardware list. The modules require an SFP+ cage and will not function in SFP-only or QSFP ports. Confirm the device firmware allows copper transceivers at the desired speed.

Plug-and-play 10G copper uplinks

Insert the transceiver into an open SFP+ slot and connect standard Cat6a or Cat7 patch cables for immediate 10 Gigabit Ethernet links. The rotating ring latch releases at a 90 degree angle for easy removal. Four modules let you populate multiple ports for uplinks, stacking or server connections without fibre cabling.

Highlights

  • Works with Cisco, Netgear, Ubiquiti and other open switches
  • Supports 1.25, 2.5, 5 and 10 Gb/s over CAT6a or CAT7 up to 30 m
  • Hot-pluggable with 90-degree ring latch for quick install or removal
  • Each module tested on multiple switch brands before shipping
  • Four transceivers in one pack for multi-port deployments

Specifications

No published specifications for this item yet.

Questions about this item

Does the 4-pack include the CAT6A or CAT7 cables needed to reach the 30 m distance?

The pack contains four SFP+ copper transceivers with RJ-45 ports; CAT6A or CAT7 patch cables must be purchased separately.

When should I choose the 1.25 Gb/s, 2.5 Gb/s, 5 Gb/s or 10 Gb/s rate on these modules?

The transceivers auto-negotiate; the switch port and the connected device determine whether the link runs at 1.25, 2.5, 5 or 10 Gb/s.

What does the 30 m reach mean when the transceivers are installed in a live switch?

It is the maximum guaranteed link length over CAT6A or CAT7 copper when the modules are operating at 10 Gb/s in a compatible switch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.