We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ARCTIC

ARCTIC 2 in 1 Accessory 2.5 SATA M.2 USB 3.2 Gen 1 5Gbps

SKU CH-FJ3D-GQH4Z

Connects a 2.5 SATA drive or SATA M.2 SSD via USB 3.2 Gen 1 at up to 5Gbps with a power switch and activity LED

  • Connect one 2.5 SATA drive or one SATA M.2 SSD at a time
  • Transfer data at up to 5Gbps with USB 3.2 Gen 1
  • Works with older USB 2.0 ports for broad compatibility
  • Blue LED shows real-time drive activity
  • Large on/off switch cuts power without unplugging

Drive Docking Solution

This adapter connects a single 2.5 SATA hard drive or SATA M.2 solid-state drive to a computer through a USB 3.2 Gen 1 port. It delivers transfer speeds up to 5Gbps and remains backward compatible with USB 2.0 interfaces. A blue activity LED shows drive status and a large power switch controls the connected device. The unit supports one drive at a time and does not operate both form factors simultaneously.

Ideal For Simple External Access

It suits users who need quick, tool-free access to SATA storage for data recovery, cloning or archiving without opening a case. The compact design works well on a desk or in a laptop bag for occasional use. Builders who require simultaneous operation of a 2.5 drive and an M.2 drive should look at a different solution. Anyone needing support for non-SATA M.2 protocols will not be served by this adapter.

Single-Drive SATA Constraint

The decisive specification is that only one SATA drive — either 2.5 or M.2 — can be active at any moment. If a workflow depends on reading from one SATA drive while writing to another, this product will not meet that requirement.

Highlights

  • Connect one 2.5 SATA drive or one SATA M.2 SSD at a time
  • Transfer data at up to 5Gbps with USB 3.2 Gen 1
  • Works with older USB 2.0 ports for broad compatibility
  • Blue LED shows real-time drive activity
  • Large on/off switch cuts power without unplugging

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2.5 SATA drive bay or M.2 slot wear out from repeated drive swaps?

The dock has no moving contacts in the SATA connectors; normal insertion cycles are rated for thousands of swaps, so the bays themselves will not need replacement.

What limits transfer speed during a long copy job — the 5Gbps USB 3.2 Gen 1 link or the SATA drive?

The SATA III drive tops out around 6Gbps, but the USB 3.2 Gen 1 connection caps sustained throughput at 5Gbps, so the USB link is the first bottleneck.

Does the blue activity LED or the power switch add noticeable heat when the dock runs all day?

Both draw only milliwatts; the dock body stays near ambient temperature during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.