We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small silver SFP+ transceiver modules with RJ45 ports

ARCTIC

ARCTIC 10G SFP+ to RJ45 Transceiver 2 Pack 2 in 1 accessory

SKU CH-8DAS-23DA2

A two-pack of 10G SFP+ to RJ45 copper transceivers reaching 30 metres over Cat6a or Cat7 cable

  • Delivers 10GBase-T up to 30 m over Cat6a/Cat7 copper
  • Works with Cisco, Ubiquiti, Mikrotik, Netgear, TP-Link and other 10G SFP+ gear
  • Hot-pluggable, plug-and-play with no software or configuration required
  • Low power draw under 2.5 W with thermal gasket for cooler operation
  • Individually tested on 2.5, 5 and 10 Gbps switches and routers

10G SFP+ Copper Transceiver Pair

This two-pack provides 10GBase-T connectivity through standard SFP+ ports using Cat6a or Cat7 copper cabling. Each module reaches 30 metres at full 10 Gbps line rate. They suit network engineers and integrators adding RJ-45 links to switches, routers or servers that accept SFP+ transceivers.

Multi-Vendor Compatibility List

The transceivers are tested with Cisco, Ubiquiti UDM Pro, Mikrotik CRS310 and CRS309-1G-8S+IN, Fortinet, Netgear, D-Link, TP-Link, Linksys, Supermicro, Broadcom, Meraki, Edge-core, EMC, F5 and Norkia equipment supporting open SFP+ slots. The Ubiquiti US-48-500W switch is explicitly excluded from the supported list.

Plug-and-Play Installation Notes

Modules are hot-pluggable and require no software or configuration; they comply with SFP+ MSA, IEEE 802.3an, 802.3az, SFF-8431 and SFF-8432. Power draw stays below 2.5 W and operating temperature spans 0 to 70 °C. Buyers needing longer copper runs or lower heat should note the 80 metre Broadcom BCM84891 alternative mentioned by the maker.

Highlights

  • Delivers 10GBase-T up to 30 m over Cat6a/Cat7 copper
  • Works with Cisco, Ubiquiti, Mikrotik, Netgear, TP-Link and other 10G SFP+ gear
  • Hot-pluggable, plug-and-play with no software or configuration required
  • Low power draw under 2.5 W with thermal gasket for cooler operation
  • Individually tested on 2.5, 5 and 10 Gbps switches and routers

Specifications

No published specifications for this item yet.

Questions about this item

Will the RJ-45 connector or copper cable need replacement after heavy use?

The transceiver uses a standard RJ-45 connector rated for Cat6a or Cat7 copper cable up to 30 m; no internal moving parts require scheduled replacement.

What distance limit appears first when running 10GBase-T continuously?

The module is specified for 30 m (98.4 ft) over Cat6a or Cat7 cable; beyond that distance signal integrity degrades before any thermal limit is reached.

How much heat and power does each module produce when running all day?

Each transceiver draws under 2.5 W and operates from 0 to 70 °C (32 to 158 °F) with a thermally conductive gasket for heat dissipation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.