We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight 4ft RGBWW LED pixel bars in a flight case

Aputure

Aputure INFINIBAR PB12 4ft RGBWW LED Pixel Bar 8-Light Kit

SKU CH-BKMW-DS9AX

Eight 4-foot RGBWW LED pixel bars with 96 pixels each, 2000-10000K colour temperature, magnetic mounting and a 330W power supply in a flight case

  • Adjustable intensity gives precise illumination for any scene
  • 2000–10000K range creates warm-to-cool ambiance with faithful colour
  • 96 pixels per bar deliver even, diffused light with minimal harsh shadows
  • Magnetic spacers and clamp-to-baby pin adapters enable quick mounting and workflow speed
  • Eight 4 ft bars plus 330 W adapter with 8-way splitters power the full kit from one case

Eight 4ft RGBWW pixel bars

The Aputure INFINIBAR PB12 8-Light Production Kit supplies eight 120cm full-colour LED pixel bars for stage, studio and on-location production. Each bar contains 96 addressable pixels, giving granular control over colour and intensity across a continuous 4ft length. The kit targets lighting designers and gaffers who need scalable, pixel-mappable fixtures in a single flight case.

2000–10000K tuning with 330W shared supply

Colour temperature adjusts continuously from 2000K to 10000K, covering warm tungsten through cool daylight without gels. The included 330W power adapter with 8-way splitters drives all eight bars simultaneously, so output scales with the number of fixtures rather than a single head. Maximum brightness is limited by the shared 330W budget; large installations requiring higher sustained output will need additional power units.

Magnetic spacers, 10 connectors and flight case

Magnetic spacers and clamp-to-baby-pin adapters enable rapid rigging on truss, pipe or stand without tools. Ten differently shaped connectors allow bars to link in straight lines, angles or custom geometries, extending creative possibilities beyond a single 4ft segment. All fixtures, cables, adapters and light-control grids pack into the supplied flight case for protected transport and organised storage.

Highlights

  • Adjustable intensity gives precise illumination for any scene
  • 2000–10000K range creates warm-to-cool ambiance with faithful colour
  • 96 pixels per bar deliver even, diffused light with minimal harsh shadows
  • Magnetic spacers and clamp-to-baby pin adapters enable quick mounting and workflow speed
  • Eight 4 ft bars plus 330 W adapter with 8-way splitters power the full kit from one case

Specifications

No published specifications for this item yet.

Questions about this item

Will the 120cm pixel bars mount on my existing baby-pin stands?

Yes — each bar includes clamp-to-baby pin adapters so the 120cm fixtures attach directly to standard baby-pin stands.

How do I verify the 96 pixels per bar are all responding after setup?

Run the internal pixel self-test or send a full-colour sweep from the controller; every one of the 96 pixels on each 120cm bar should transition smoothly without dead zones.

Does the 8-Light Kit include the 10 shaped connectors and the 330W 8-way power supply, or must I buy them separately?

The kit ships with the 10 differently-shaped connectors, the 330W power adapter with 8-way splitters, power cables, light control grids and a flight case — no extra purchases required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.