We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black rubber vacuum belts in clear packaging

Appliance Factory Parts

Appliance Factory Parts 21-3207-00 Eureka Genuine Vacuum Belt 2 Pack

SKU CH-58BE-EYP0W

Genuine Eureka vacuum belt pack of two fits 16 Eureka, six Sanitaire and one Clarke upright models

  • Selling UnitEach
  • TypeVacuums & Steamers
  • Genuine Eureka OEM belt ensures correct fit and tension
  • Two-pack provides a spare for uninterrupted cleaning
  • Fits 16 Eureka upright models including 5000, 6000, 7575
  • Compatible with 6 Sanitaire commercial models such as SC888, SC684E
  • Also fits Clarke model 512 for broader appliance coverage

Genuine Eureka Vacuum Belt Two Pack

This pack supplies two original Eureka belts built to OEM specification for upright vacuum cleaners. It fits a wide range of Eureka models including the 7575, 5000, 5071E and 2000 series. The belts also suit Sanitaire commercial units such as the SC684E and SC888. Homeowners and maintenance teams can keep a spare on hand for quick replacement.

Replaces Stretched Or Snapped Drive Belts

Swap the belt when the brush roll stops turning or the vacuum leaves debris behind. A fresh belt restores full agitation on carpet and hard floors. The change is worth it when the old belt shows cracks, glazing or has lost tension. One single belt is available under part E-30563 if only one is needed.

Simple Tool Free Installation

Remove the bottom plate, slide the worn belt off the motor shaft and brush roll, then fit the new belt in the same path. No tools are required on most listed uprights. The most common error is twisting the belt during fitting which causes premature wear. Ensure the belt sits flat in the motor pulley groove before reassembling the plate.

Highlights

  • Genuine Eureka OEM belt ensures correct fit and tension
  • Two-pack provides a spare for uninterrupted cleaning
  • Fits 16 Eureka upright models including 5000, 6000, 7575
  • Compatible with 6 Sanitaire commercial models such as SC888, SC684E
  • Also fits Clarke model 512 for broader appliance coverage

Specifications

BrandAppliance Factory Parts
Selling UnitEach
Part Number21-3207-00
TypeVacuums & Steamers

Questions about this item

Which upright models does the 21-3207-00 belt fit?

The belt fits Eureka uprights 1400, 1402A, 1453D, 1900, 2000, 2010XRB, 2070, 2097, 2100, 4000, 5000, 5071E, 6000, 6400, 7534A and 7575, plus Sanitaire SC684E, SC688, SC695A, SC888, SC9050 and S-647B, and Clarke 512.

How do I install the belt on my Eureka upright?

Unplug the vacuum, remove the bottom plate, slide the old belt off the motor shaft and brush roll, loop the new belt onto the motor shaft first, then stretch it over the brush roll, reseat the brush roll, and replace the bottom plate.

When should I replace these belts?

Replace a belt when it stretches, frays, cracks or slips during use; a worn belt reduces brush-roll speed and cleaning performance, so swap it at the first sign of wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.