Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00942025BTC
In stock
Appleton Century Crofts
Appleton Century Crofts EYS-6 IMC Sealing Conduit 2 in Threaded Iron Silver
Seals conduit runs against gases, vapours and flames in Class I, II and III hazardous locations, 2 in trade size for IMC and RMC
- TypeCable Management & Conduit
- Hazardous-location sealing for Class I, II, III divisions
- Prevents gas, vapour and flame passage between conduit sections
- 2 in FNPT threaded ends fit IMC and RMC conduit
- Vertical or horizontal mounting for flexible installation
- Iron construction with silver finish for durability
Trade size and hazardous rating
This Appleton EYS-6 sealing conduit fits 2-inch IMC and RMC systems. It carries Class I Division 1 and 2 ratings for Groups B, C, D, plus Class II Division 1 and 2 for Groups E, F, G and Class III. The iron body is threaded female on both ends for vertical or horizontal runs.
2-inch FNPT threaded ends
The fitting provides two 2-inch FNPT connections with an overall length of 6 1/4 inches. This specific thread size and orientation determine whether it matches the existing conduit layout. No other trade sizes or thread genders are available for this model.
Plain iron finish with no extras
The silver iron housing ships as a single sealing fitting. No packing material, sealing compound, locknuts or bushings are included. Installers must supply their own thread sealant and any required grounding hardware separately.
Highlights
- Hazardous-location sealing for Class I, II, III divisions
- Prevents gas, vapour and flame passage between conduit sections
- 2 in FNPT threaded ends fit IMC and RMC conduit
- Vertical or horizontal mounting for flexible installation
- Iron construction with silver finish for durability
Specifications
| Brand | APPLETON ELECTRIC |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
What does the 2 in trade size mean for the conduit I can connect?
It matches 2 in IMC or RMC conduit so the fitting threads directly onto that conduit without reducers.
How do the FNPT threads affect what I can screw into each end?
Both ends are 2 in female NPT so only male NPT nipples, conduit or plugs with matching threads will engage.
What clearance do I need to mount this 6 1/4 in long fitting vertically or horizontally?
Allow at least 6 1/4 in straight run plus wrench room; the iron body fits standard 2 in conduit straps for either orientation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
