Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940434BTC
In stock
Appleton Century Crofts
Appleton Century Crofts EYS-21 IMC Sealing Conduit 3/4 in Threaded Iron Electro Zinc
Seals conduit runs in hazardous locations with 3/4 inch threaded iron fittings rated for Class I, II and III divisions
- TypeCable Management & Conduit
- Vertical and horizontal sealing for flexible installation
- 3/4 in FNPT threaded ends fit IMC and RMC conduit
- Iron body with electro-zinc finish resists corrosion
- Rated Class I Div 1/2 Groups A–D for hazardous areas
- Prevents gas, vapor and flame passage between conduit sections
Sealing Fitting for Hazardous Areas
This Appleton EYS-21 conduit sealing fitting is designed for IMC and RMC systems in classified locations. It prevents the passage of gases, vapours or flames between conduit sections. The fitting suits vertical or horizontal installations in Class I, II and III hazardous areas.
Behaviour Under Sustained Load
The iron body with electro-zinc finish resists corrosion during continuous exposure in harsh environments. Its construction maintains sealing integrity when conduit systems operate under persistent vibration or thermal cycling. The fitting contains pressure without degradation over extended service periods.
Thermals Noise and Power Draw
As a passive mechanical component, the fitting generates no heat, noise or electrical draw during normal operation. The silver electro-zinc surface aids heat dissipation from the conduit system. It adds no thermal load to the installation and requires no power supply.
Highlights
- Vertical and horizontal sealing for flexible installation
- 3/4 in FNPT threaded ends fit IMC and RMC conduit
- Iron body with electro-zinc finish resists corrosion
- Rated Class I Div 1/2 Groups A–D for hazardous areas
- Prevents gas, vapor and flame passage between conduit sections
Specifications
| Brand | APPLETON ELECTRIC |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
How much heat does the iron electro-zinc conduit body generate when energised all day?
The fitting is a passive conduit component with no electrical load, so it produces no measurable heat during continuous operation.
What conduit and fittings must I already have to install this 3/4 in FNPT sealing fitting?
You need 3/4 in trade-size IMC or RMC conduit plus matching 3/4 in FNPT threaded couplings to connect each end.
Will this Class I Division 1 sealing fitting work with older rigid metal conduit already in place?
Yes, it is compatible with existing 3/4 in RMC systems as well as IMC, provided the threads are clean and undamaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
