We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver threaded aluminium conduit fitting with powder finish

Appleton Century Crofts

Appleton Century Crofts EYF-125AL IMC Sealing Conduit 1-1/4 in Threaded Aluminum Powder

SKU CH-4XN8-GYEBR

Sealing fitting for 1-1/4 inch IMC conduit, aluminium construction, rated for Class I Division 1 and 2 hazardous locations

  • TypeCable Management & Conduit
  • Seals conduit against gas and flame passage in hazardous locations
  • Rated for Class I Division 1 and 2 Groups C and D environments
  • Suitable for Class II Division 1 and 2 Groups E F G areas
  • Aluminium construction with powder coating resists corrosion in tough conditions
  • Female threaded ends fit 1-1/4 inch IMC and RMC conduit systems

Appleton EYF-125AL Sealing Conduit

This Appleton EYF-125AL sealing conduit fits 1-1/4 inch IMC and RMC raceways in hazardous locations. The aluminum body with powder coating resists corrosion while maintaining electrical continuity. It carries Class I Division 1 and 2, Groups C and D ratings plus Class II Division 1 and 2, Groups E, F, G and Class III approvals. The fitting prevents gases, vapours or flames from migrating between conduit sections.

Replaces open fittings in classified areas

Standard couplings cannot block flame propagation in Division 1 environments. This sealing fitting installs vertically or horizontally with female NPT threads on both ends. The 4 15/16 inch overall length fits tight enclosures where conduit runs change direction. The jump is worth it when code requires a listed seal between conduit sections in explosive atmospheres.

Suits electricians wiring hazardous plants

Installers running 1-1/4 inch IMC or RMC in refineries, grain elevators or chemical plants will specify this fitting. It is not for buyers who need EMT compatibility or larger trade sizes. Builders working in non-classified areas can use standard couplings instead. The aluminium construction also rules it out for applications requiring ferrous metal conduit bodies.

Highlights

  • Seals conduit against gas and flame passage in hazardous locations
  • Rated for Class I Division 1 and 2 Groups C and D environments
  • Suitable for Class II Division 1 and 2 Groups E F G areas
  • Aluminium construction with powder coating resists corrosion in tough conditions
  • Female threaded ends fit 1-1/4 inch IMC and RMC conduit systems

Specifications

BrandAPPLETON ELECTRIC
TypeCable Management & Conduit

Questions about this item

What thread size and conduit type does the EYF-125AL accept for mounting?

The fitting has 1-1/4 in FNPT threads on both ends and is listed for use with IMC and RMC conduit of the same trade size.

How do I install the sealing fitting and what is the common mistake?

Thread the fitting onto the conduit, pack the hub with approved sealing compound, and let it cure before energising; the frequent error is skipping the compound or using an unlisted type.

What maintenance or replacement will the EYF-125AL need over time?

Inspect the seal periodically for cracks or corrosion; if the compound has degraded or the aluminium body shows damage, replace the entire fitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.