We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron sealing hub with threaded ends

Appleton Century Crofts

Appleton Century Crofts ES10075 Sealing Hub 25 Fill Malleable Iron 3/4 FNPT 1 MNPT

SKU CH-E64P-8N6A2

Malleable-iron sealing hub rated for hazardous locations, 25 % fill, 3/4 in. FNPT to 1 in. MNPT, UL 886 and CSA C22.2 No 30 listed

  • TypeHazardous Location
  • Rated for hazardous locations Class I, II, III Divisions 1 & 2
  • 25 percent fill capacity suits vertical sealing fitting installations
  • Malleable iron construction provides mechanical strength for conduit systems
  • UL 886 and CSA C22.2 No 30 standards compliance verified
  • 3/4 inch FNPT to 1 inch MNPT connects differing conduit sizes

Sealing Hub for Hazardous Locations

The Appleton Century Crofts ES10075 is a malleable iron conduit fitting rated for Class I, Division 1 and 2, Groups A, B, C, D; Class II, Division 1 and 2, Groups E, F, G; and Class III environments. It provides a vertical sealing point for conduit runs in hazardous areas.

Vertical Orientation and Fill Limit

This fitting is designed for vertical installation only with a 25 percent fill capacity. It meets UL 886 and CSA C22.2 No 30 standards for hazardous location fittings. The 3/4 inch FNPT by 1 inch MNPT ends connect differing conduit sizes.

Threaded Installation with Code Compliance

The tapered NPT threads allow direct assembly into conduit systems without special tools. Correct thread engagement and sealing compound are required to maintain the hazardous location rating. Improper orientation or overfilling voids the certification.

Highlights

  • Rated for hazardous locations Class I, II, III Divisions 1 & 2
  • 25 percent fill capacity suits vertical sealing fitting installations
  • Malleable iron construction provides mechanical strength for conduit systems
  • UL 886 and CSA C22.2 No 30 standards compliance verified
  • 3/4 inch FNPT to 1 inch MNPT connects differing conduit sizes

Specifications

BrandAppleton Electric
ModelES10075
TypeHazardous Location

Questions about this item

How does the 25 percent fill rating affect the number of conductors I can install?

The 25 percent fill rating limits the total cross-sectional area of conductors inside the hub to one quarter of the internal volume, so you must calculate each wire's area and keep the sum within that limit.

What does the Class I Division 1 rating mean for daily operation in a hazardous area?

It certifies the hub for locations where flammable gases or vapours are present continuously or frequently under normal conditions, providing a flame path that contains any internal ignition.

How do the UL 886 and CSA C22.2 No 30 standards govern the hub's construction?

UL 886 and CSA C22.2 No 30 set the design, material and testing requirements for sealing fittings, ensuring the malleable iron body and threaded joints maintain integrity in classified locations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.