Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941162BTC
In stock
Appleton Century Crofts
Appleton Century Crofts ELMF 90° Elbow 1-1/4 in Threaded Iron
A 90-degree threaded iron elbow connects 1-1/4 inch IMC conduit with hazardous-location ratings for Class I, II and III divisions
- TypeCable Management & Conduit
- 90-degree turn routes conduit around tight corners
- 1-1/4 inch threaded ends join IMC and RMC directly
- Iron body with electroplated finish resists corrosion in harsh environments
- Rated for Class I Division 1 and 2 hazardous locations
- Female-to-male NPT threads simplify installation without extra couplings
Conduit elbow for IMC systems
This Appleton Century Crofts elbow connects 1-1/4 inch IMC conduit at a 90-degree angle. It is built for hazardous locations rated Class I, Division 1 and 2, Groups A, B, C, D and Class II, Division 1 and 2, Groups E, F, G. The fitting suits industrial electrical installations that require a directional change in threaded rigid metal conduit runs.
Electroplated iron handles heat and corrosion
The iron body carries an electroplated finish that resists corrosion in demanding environments. Threaded female-to-male ends (1-1/4 in FNPT to 1-1/4 in MNPT) join securely without additional sealing compounds. The rigid metal construction contains no moving parts, so it adds no operational noise or power draw to the conduit system.
Hazardous-location rating simplifies compliance
The Class I, II and III hazardous-location rating means the fitting meets code for explosive gas, dust and fibre atmospheres without extra enclosures. The 3-5/16 inch overall length fits standard conduit spacing. No software or accessories are bundled; the component is a standalone mechanical fitting for threaded IMC conduit.
Highlights
- 90-degree turn routes conduit around tight corners
- 1-1/4 inch threaded ends join IMC and RMC directly
- Iron body with electroplated finish resists corrosion in harsh environments
- Rated for Class I Division 1 and 2 hazardous locations
- Female-to-male NPT threads simplify installation without extra couplings
Specifications
| Brand | APPLETON ELECTRIC |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
How do I install the 1-1/4 in ELMF elbow and what step is often missed?
Thread the female NPT end onto the conduit and the male NPT end into the fitting; the step often missed is applying thread sealant rated for hazardous locations before tightening to maintain the Class I Division 1 seal.
What maintenance or replacement will the electroplated iron elbow need later?
Inspect the electroplated finish periodically for corrosion or damage; replace the elbow if the plating is compromised or if threads show wear that could affect the hazardous-location rating.
What limit appears first on the 1-1/4 in elbow under sustained use in a hazardous area?
The electroplated iron coating is the first limit; once the finish degrades, the fitting may no longer meet Class I Division 1 Groups A B C D requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
