Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00951132BTC
In stock
Appleton Century Crofts
Appleton Century Crofts ELBY-100A IMC 90 Deg Elbow 1 in Threaded Aluminum Powder Conduit
Threaded aluminium elbow joins 1 in IMC conduit at 90 degrees with powder-coated finish and hazardous-location rating
- TypeCable Management & Conduit
- 90-degree turn routes conduit in tight spaces
- Threaded female ends join 1-inch IMC or RMC conduit
- Powder-coated aluminium resists corrosion in harsh environments
- Rated for Class I, II and III hazardous locations
- Capped elbow design protects conductors at the bend
1-inch IMC elbow for hazardous locations
The Appleton ELBY-100A is a 90-degree threaded elbow designed to join two lengths of 1-inch IMC or threaded rigid metal conduit. Its powder-coated aluminium body carries Class I Division 1 and 2, Class II Division 1 and 2, and Class III hazardous-location ratings. Electricians and maintenance crews use it to change direction in conduit runs inside classified areas.
Verify conduit type and trade size before ordering
Confirm that the existing raceway is 1-inch IMC or threaded RMC with female NPT threads on both ends. The fitting accepts only that trade size and thread form, so mismatched conduit or a different thread standard will not engage. No other conduit type or diameter is compatible with this elbow.
Powder coating adds corrosion resistance
The factory-applied powder finish protects the aluminium from moisture and chemical exposure common in hazardous environments. No separate sealant, gasket or mounting hardware is supplied, so installers must provide any required thread compound or locknuts. The coating does not alter the fitting’s electrical continuity or its hazardous-location certification.
Highlights
- 90-degree turn routes conduit in tight spaces
- Threaded female ends join 1-inch IMC or RMC conduit
- Powder-coated aluminium resists corrosion in harsh environments
- Rated for Class I, II and III hazardous locations
- Capped elbow design protects conductors at the bend
Specifications
| Type | Cable Management & Conduit |
|---|---|
| Brand | APPLETON ELECTRIC |
Questions about this item
What comes in the box and is anything else needed for installation?
The package contains the 90-degree elbow fitting. Compatible IMC or threaded rigid conduit and any required locknuts or bushings are sold separately.
Which trade size should I select for a 1-inch conduit run?
Choose the 1-inch trade size; it matches the 1-inch FNPT ends and the 1-inch conduit diameter specified for this elbow.
What does the 90-degree orientation mean when the elbow is installed?
It changes the conduit direction by a right angle, allowing a 90-degree turn in hazardous-location runs while maintaining the Class I Division 1 and 2 rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
