Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00913215BTC
In stock
Appleton Century Crofts
Appleton Century Crofts Conduit Fitting 40% Fill 8.000
Aluminium sealing fitting with 40% fill rating prevents gas and flame passage in vertical hazardous-location conduit runs
- TypeConduit Fittings
- Color/FinishSilver
- MaterialAluminum
- Length8.000
- Sealing fitting rated for hazardous locations Class I Division 1 & 2
- 40 % fill capacity allows dense conductor packing
- Aluminium body resists corrosion in tough environments
- Vertical orientation suits straight conduit runs
- 000 overall length fits standard installations
Conduit Fitting for Hazardous Locations
This aluminum sealing fitting connects 1-1/2 inch FNPT to 1-1/2 inch MNPT conduit ends in vertical runs. It is built for Class I, Division 1 and 2, Groups C and D environments. The fitting prevents gases, vapors or flames from passing between conduit sections. It suits industrial electrical installations in hazardous areas.
40% Fill Capacity for Conductor Limits
The fitting supports a 40% fill ratio for 1-1/2 inch trade size IMC or RMC conduit. This specification determines the maximum number of conductors allowed inside. Exceeding this limit violates code and compromises the seal. Verify your conductor count against this fill rating before installation.
Aluminum Body Dissipates Heat Naturally
The silver aluminum construction resists corrosion and conducts heat away from the conduit interior. No moving parts or powered components generate noise during operation. The fitting adds no electrical load to the circuit. It maintains its seal integrity across the rated temperature range for the hazardous location classes listed.
Highlights
- Sealing fitting rated for hazardous locations Class I Division 1 & 2
- 40 % fill capacity allows dense conductor packing
- Aluminium body resists corrosion in tough environments
- Vertical orientation suits straight conduit runs
- 000 overall length fits standard installations
Specifications
| Type | Conduit Fittings |
|---|---|
| Brand | APPLETON ELECTRIC |
| Color/Finish | Silver |
| Material | Aluminum |
| Length | 8.000 |
Questions about this item
What does the 40% fill rating mean when this fitting is installed in a conduit run?
It limits the total conductor cross-section to 40 percent of the conduit's internal area, ensuring space for heat dissipation and easier wire pulling in hazardous locations.
How do the 1-1/2 inch FNPT and MNPT ends affect what conduit or enclosures can connect?
The female NPT end threads onto a male conduit or hub, while the male NPT end enters a female-threaded enclosure, creating a sealed vertical transition for IMC or RMC systems.
What physical clearance is needed to mount this 8.000-inch aluminum fitting vertically?
Allow at least the overall length of 8.000 inches in a straight vertical run, plus wrench clearance on both threaded ends for tightening into conduit and enclosure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
