We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray iron 90-degree conduit elbow with capped ends, 2.800 length

Appleton Century Crofts

Appleton Century Crofts Conduit Capped Elbow 1/2in 90° 2.800

SKU CH-7W5K-Y8WPW

A 1/2 in 90° capped elbow for hazardous-location conduit runs, 2.800 in long, iron with chromate and powder coating

  • TypeConduit Fittings
  • Color/FinishGray
  • MaterialHAWA
  • Length2.800
  • Iron construction withstands hazardous environments
  • Chromate, powder and electroplated finishes resist corrosion
  • 90-degree female-to-female elbow routes conduit in tight spaces
  • Rated Class I Groups B, C, D and Class II Groups E, F, G for explosive atmospheres
  • 800 in overall length fits standard 1/2 in trade-size installations

Hazardous-Location Conduit Elbow

This capped elbow is an iron conduit fitting built for hazardous-location installations. It connects two 1/2-inch female-threaded conduit runs at a 90-degree angle. The gray chromate, powder-coat and electroplated finish protects the iron body in corrosive environments. It is rated for Class I Groups B, C, D, Class II Groups E, F, G and Class III areas.

90-Degree Threaded Connection Limits

The fitting accepts only IMC or threaded rigid metal conduit with a 1/2-inch trade size. Both ends are fixed 1/2-inch FNPT threads, so the installer cannot change orientation or adapt to other conduit types without additional fittings. The overall length is 2.800 inches, which restricts the space available for wire pulling through the bend. No other conduit sizes or thread standards are compatible.

Class I Group B Rating Decides Suitability

The defining specification is the hazardous-location rating that includes Class I Group B atmospheres. This rating determines whether the elbow meets the code requirements for the specific gases or vapours present at the installation site. If the project does not require Group B compliance, a fitting with a lower classification may be sufficient.

Highlights

  • Iron construction withstands hazardous environments
  • Chromate, powder and electroplated finishes resist corrosion
  • 90-degree female-to-female elbow routes conduit in tight spaces
  • Rated Class I Groups B, C, D and Class II Groups E, F, G for explosive atmospheres
  • 800 in overall length fits standard 1/2 in trade-size installations

Specifications

TypeConduit Fittings
BrandAPPLETON ELECTRIC
Color/FinishGray
MaterialHAWA
Length2.800

Questions about this item

Which trade size should I choose for my 1/2-inch conduit run?

This fitting is sized for 1/2-inch trade conduit and matches the 2.800 overall length listed in the specifications.

What does the 90-degree connection orientation mean when the elbow is installed?

It creates a right-angle turn between two 1/2-inch female-threaded conduit ends, allowing the run to change direction in a single fitting.

How do the hazardous-location ratings limit where this capped elbow can be used?

It is rated for Class I Groups B, C, D; Class II Groups E, F, G; and Class III environments, so it can be installed in those designated hazardous areas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.