Apollo Valves
Apollo Valves 94A10001 3 in Brass Ball Valve FNPT Full Port
A 3 in brass ball valve with full port, FNPT connections, and a 400 PSI CWP rating for combustible gas service
- Full flow capacity with full port ball design
- Durable brass body with chrome plated ball and PTFE seats
- Blowout resistant stem for safe operation under pressure
- Certified to UL 125, 1477, 842 and CSA standards
- Manual lever handle enables quick on/off flow control
Application and Purpose
The Apollo Valves 94A10001 is a 3 in brass ball valve with female NPT threads on both ends for inline installation. It provides full port flow for on/off control in piping systems carrying combustible gases. The two-piece body uses a chrome plated brass ball, PTFE seats and EPDM seals with a blowout resistant stem. A yellow PVC and steel lever handle operates the valve manually.
Pressure and Temperature Limits
The valve carries a 400 PSI CWP rating and operates from 0 to 400 degrees F. It meets MSS SP-110 and the UL 125, UL 1477 and UL 842 standards along with CSA and FM approvals. These ratings define the maximum working pressure and temperature range for general purpose service. Installers must verify that system conditions stay within these published limits.
Connection and Port Specification
The valve size is 3 in with female NPT connections on each end matching 3 in pipe. The full port ball allows unrestricted flow through the valve opening. This combination of thread type, nominal size and port geometry determines whether the valve fits the intended pipeline and delivers the required flow capacity.
Highlights
- Full flow capacity with full port ball design
- Durable brass body with chrome plated ball and PTFE seats
- Blowout resistant stem for safe operation under pressure
- Certified to UL 125, 1477, 842 and CSA standards
- Manual lever handle enables quick on/off flow control
Specifications
| Brand | APOLLO VALVES |
|---|
Questions about this item
Which size and connection type should I select for a 3-inch pipe run?
Choose the 3 in valve with female NPT threads on both ends; it matches 3 in pipe and provides a full port opening.
What does the 400 PSI CWP rating mean when the valve is installed?
It indicates the valve can handle up to 400 PSI cold working pressure within a 0 to 400 °F temperature range for general purpose service.
Which standards apply to the valve and what do they cover?
The valve meets MSS SP-110 and UL 125, UL 1477, UL 842 plus CSA and FM approvals for combustible gas service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
