We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass inline ball valve with lever handle, sweat connections

Apollo

Apollo 95ALF20501 1" Sweat Brass Ball Valve Inline bathware

SKU CH-ZWEF-7VDSB

A 1-inch sweat brass ball valve rated for 600 psi CWP and temperatures from 32 to 250 degrees Fahrenheit

  • TypeTraffic & Parking Lot
  • Full-port design maintains unrestricted 1-inch flow
  • 600 psi CWP rating handles high-pressure plumbing demands
  • Blowout-proof stem prevents dangerous stem ejection
  • PTFE seats ensure reliable sealing from 32 to 250 degrees F
  • Sweat connections create permanent leak-free copper joints

1" Sweat Brass Ball Valve for plumbing systems

The Apollo 95ALF20501 is a 1-inch full-port ball valve designed for inline installation using sweat connections. Its brass body and chrome-plated brass ball suit residential and commercial water lines. The lever handle allows quick manual control. It meets a 600 psi CWP rating and operates from 32 to 250 degrees Fahrenheit.

Replaces gate valves or worn stop valves in copper

Upgrading to this full-port design removes the flow restriction common with older globe or gate valves. The blowout-proof stem and PTFE seats reduce the risk of leaks that develop over time on compressed packing nuts. The jump is worth it when a supply line needs reliable shut-off without reducing pipe diameter.

Fits 1-inch copper tubing with sweat fittings

The valve requires soldering equipment and flux for installation on compatible tubing. Its two-piece brass body with EPDM seals handles standard potable water pressure. The plated steel lever clears adjacent fittings in tight runs. It does not suit threaded, press-fit or PEX systems without separate transition adapters.

Highlights

  • Full-port design maintains unrestricted 1-inch flow
  • 600 psi CWP rating handles high-pressure plumbing demands
  • Blowout-proof stem prevents dangerous stem ejection
  • PTFE seats ensure reliable sealing from 32 to 250 degrees F
  • Sweat connections create permanent leak-free copper joints

Specifications

BrandAPOLLO
TypeTraffic & Parking Lot

Questions about this item

What 1" copper pipe preparation does the sweat connection need?

Clean and deburr both 1" copper tube ends, apply flux, slide the valve onto each tube, then sweat the joints with lead-free solder; the full-port body accepts standard 1" Type K, L or M tubing.

Which installation step is most often missed on this 600 psi CWP brass valve?

Forgetting to support the valve body while heating — thermal expansion can twist the inline joints, so brace the valve before sweating both ends.

What part should be inspected first if the lever handle becomes stiff after seasonal use?

Check the PTFE seats and EPDM body seals for mineral buildup; the chrome-plated brass ball and blowout-proof brass stem rarely wear, but seats and seals degrade in hard water.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.