We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze ball valve with lever handle, FNPT ends

Apollo

Apollo 95ALF10501 LF Bronze Ball Valve 1 in FNPT

SKU CH-61B9-HYCQA

Lead-free bronze ball valve with 1 in FNPT connections rated for 600 psi and 250 °F

  • TypeOther
  • Lead-free bronze body meets NSF and CRN standards
  • 600 psi rating handles demanding plumbing applications
  • 250 °F maximum temperature suits hot-water systems
  • Lever handle in zinc-plated steel gives secure grip
  • 33 in overall length fits standard 1 in FNPT connections

1-Inch Lead-Free Bronze Ball Valve

This manual two-way ball valve uses a lead-free brass body rated to NSF and CRN standards. The FNPT x FNPT threads accept 1-inch pipe on both ends for inline shut-off in potable-water or hydronic systems. A zinc-plated steel lever handle provides quarter-turn operation.

Upgrade From Gate Or Older Brass Valves

The full-port bronze ball design reduces pressure drop compared with traditional gate valves and eliminates the stem-packing leaks common on aged compression stops. The 600 psi pressure rating and 250 °F temperature limit suit residential and light-commercial hot-water loops where older valves may weep or seize.

Sustained High-Temperature Service

Brass construction and PTFE seats maintain sealing integrity through daily thermal cycles up to the rated maximum temperature. The lever handle stays operable after long periods in the open or closed position, avoiding the binding that affects gate valves left untouched for months.

Highlights

  • Lead-free bronze body meets NSF and CRN standards
  • 600 psi rating handles demanding plumbing applications
  • 250 °F maximum temperature suits hot-water systems
  • Lever handle in zinc-plated steel gives secure grip
  • 33 in overall length fits standard 1 in FNPT connections

Specifications

BrandAPOLLO
TypeOther

Questions about this item

What pipe thread size does the 1 in FNPT valve accept?

The valve uses 1 in FNPT x FNPT connections, so it threads directly onto 1 in male NPT pipe ends without additional adapters.

How do I install the lever handle on the brass ball valve?

The lever handle is factory-assembled to the stem; installation requires threading the valve onto the pipe and tightening with a wrench on the body flats, not the handle, to avoid stem damage.

When should the bronze ball valve be inspected or replaced?

Inspect the valve annually for leakage or stiff operation; replace if the lever becomes hard to turn, the seal weeps at 600 psi rating, or the body shows corrosion after prolonged 250 °F service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.