Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936792BTC
In stock
Apollo
Apollo 95ALF10401 LF Bronze Ball Valve 3/4 in FNPT
Lead-free bronze ball valve with FNPT connections rated for 600 psi and 250 °F
- TypeOther
- Lead-free brass meets NSF and CRN standards
- Lever handle on zinc-plated steel allows quick manual operation
- 600 psi rating handles high-pressure residential lines
- 250 °F maximum temperature suits hot-water systems
- 94 in overall length fits standard 3/4 in FNPT piping
Lead-Free Bronze Ball Valve 3/4 in
The Apollo 95ALF10401 is a lead-free bronze ball valve with FNPT threaded connections on both ends. It meets NSF standards and carries CRN registration for pressure-vessel compliance. The C27451 alloy ensures the body contains no detectable lead, making it suitable for potable-water systems. A zinc-plated steel lever handle provides manual two-way flow control.
Plumbing Professionals and DIY Installers
This valve suits plumbers and homeowners who need a code-compliant shut-off for residential or light-commercial water lines. The 600 psi pressure rating and 250 °F temperature limit cover typical hot and cold distribution loops. Buyers who require a larger pipe diameter, a different connection type or automated actuation should look at alternative models.
600 psi Pressure Rating and 250 °F Limit
The valve comfortably handles standard municipal supply pressures and domestic hot-water temperatures up to 250 °F. Its 3.94 in overall length fits common rough-in dimensions for 3/4 in piping. Systems that exceed 600 psi or operate above 250 °F will exceed the published limits and require a higher-rated valve.
Highlights
- Lead-free brass meets NSF and CRN standards
- Lever handle on zinc-plated steel allows quick manual operation
- 600 psi rating handles high-pressure residential lines
- 250 °F maximum temperature suits hot-water systems
- 94 in overall length fits standard 3/4 in FNPT piping
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
What size and thread type of piping must I already have to install the 3/4 in FNPT ball valve?
You need 3/4 inch piping with female National Pipe Thread (FNPT) ends to match the valve's FNPT x FNPT connections.
Will the 600 psi pressure rating and 250 Degrees F temperature limit suit the older supply lines I plan to keep?
The valve handles up to 600 psi and 250 Degrees F, so it will work with existing lines rated for at least those limits.
How can I confirm the lever handle operates the valve correctly after installation?
Turn the lever a quarter turn; the ball inside should rotate fully, stopping flow when perpendicular and allowing full flow when parallel to the pipe.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
