We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Apollo

Apollo 94ALF-101-01A 1/4" NPT Brass Ball Valve

SKU CH-MNAB-C6H8B

1/4" NPT lead-free brass ball valve rated 600 psi CWP with full-port flow and blowout-proof stem

  • TypeTraffic & Parking Lot
  • Lead-free brass body meets safe-water standards
  • Full-port design allows unrestricted flow through the valve
  • Rated for 600 psi CWP in demanding installations
  • Operates from -20 to 450 degrees F across wide conditions
  • Blowout-proof stem prevents stem ejection under pressure

Product Identity

The Apollo 94ALF-101-01A is a lead-free brass ball valve built for inline plumbing connections. It suits installers who need a full-port shut-off for 1/4 inch NPT piping in water or compatible fluid lines.

Installation Notes

The valve uses female NPT threads on both ends so it threads directly onto matching pipe nipples without soldering. PTFE seats and seals require only moderate wrench tightening; over-torquing the brass body can distort the seal faces and cause leaks.

Decisive Specification

The 600 psi cold working pressure rating defines the safe operating limit for this component. Systems that exceed this pressure need a different valve body rated for higher service conditions.

Highlights

  • Lead-free brass body meets safe-water standards
  • Full-port design allows unrestricted flow through the valve
  • Rated for 600 psi CWP in demanding installations
  • Operates from -20 to 450 degrees F across wide conditions
  • Blowout-proof stem prevents stem ejection under pressure

Specifications

BrandAPOLLO
TypeTraffic & Parking Lot

Questions about this item

How do I confirm the Apollo 94ALF-101-01A ball valve is operating correctly after installation?

Operate the lever handle through its full travel and verify smooth movement; check that no fluid leaks from the PTFE body seal or stem packing while the system is under pressure up to 600 psi CWP.

What components come with the valve and what must be purchased separately?

The box contains the 1/4 inch NPT inline brass ball valve with lever handle; pipe thread sealant or tape and any required piping or fittings are not included and must be bought separately.

Which version of this valve should I choose for a lead-free potable water line rated to 600 psi CWP?

Select the 94ALF-101-01A model with lead-free brass body, chrome-plated brass ball, PTFE seats and blowout-proof stem, which matches the 1/4 inch FNPT x FNPT full-port specification for 600 psi CWP service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.