Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936005BTC
In stock
Apollo
Apollo 94A10601 1-1/4" FNPT Brass Ball Valve Inline 600 psi
1-1/4" FNPT brass ball valve rated 600 psi CWP with full-port flow, PTFE seats and blowout-proof stem for 0-400°F service
- TypeOther
- Full-port design maintains unrestricted flow through 1-1/4" FNPT connections
- Blowout-proof stem prevents accidental stem ejection under pressure
- 600 psi CWP rating handles demanding commercial and residential systems
- PTFE seats deliver reliable sealing from 0 to 400 °F
- Chrome-plated brass ball resists corrosion for extended service life
Apollo 94A10601 Brass Ball Valve
This Apollo 94A10601 is a 1-1/4 inch FNPT inline brass ball valve built for residential and commercial plumbing. It suits installers who need a full-port, two-piece body with a blowout-proof stem for reliable shut-off service.
Replaces worn gate or globe valves
Swapping an old gate or globe valve for this ball valve cuts operating torque and eliminates the multi-turn wheel. The jump pays off when faster quarter-turn operation and a full-bore flow path matter more than the existing valve's gradual closure.
600 psi CWP and 0 to 400 °F range
The 600 psi cold working pressure and 0 to 400 °F temperature window set the practical envelope for water, oil and air lines. PTFE seats and chrome-plated brass ball limit chemical compatibility, so aggressive solvents or steam above 400 °F fall outside the design limits.
Highlights
- Full-port design maintains unrestricted flow through 1-1/4" FNPT connections
- Blowout-proof stem prevents accidental stem ejection under pressure
- 600 psi CWP rating handles demanding commercial and residential systems
- PTFE seats deliver reliable sealing from 0 to 400 °F
- Chrome-plated brass ball resists corrosion for extended service life
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
What pipe size and thread type does the 1-1/4" FNPT brass ball valve require for installation?
The valve uses a 1-1/4 inch pipe size with FNPT x FNPT connections, so both ends need matching female National Pipe Taper threads for a proper seal.
Which step is often missed when installing the inline 2-piece brass ball valve with a blowout-proof stem?
Installers sometimes forget to apply thread sealant or tape to the FNPT connections before tightening, which can cause leaks at the 600 psi CWP rating.
How often should the PTFE seats and chrome-plated brass ball be inspected or replaced in a 0 to 400 degree F temperature range?
Inspect the PTFE seats and chrome-plated brass ball annually, or sooner if cycling frequently near the 400 degree F limit, and replace them if leakage or stiff handle operation appears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
