We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve, straight body, sweat ends, lever handle

Apollo

Apollo 82LF24601 1-1/4" Sweat Bronze Ball Valve Inline

SKU CH-FF14-V701F

Inline bronze ball valve with a full-port 316 stainless-steel ball rated for 600 psi water and 150 psi steam service

  • TypeOther
  • Full-port flow with 316 stainless steel ball
  • 600 psi pressure rating for demanding water lines
  • 150 psi steam rating for heating systems
  • Vacuum service to 29 in Hg for versatile installs
  • Lead-free bronze body meets Prop 65 requirements

Apollo 82LF24601 Bronze Ball Valve

The Apollo 82LF24601 is a 1-1/4 inch sweat bronze ball valve designed for inline installation. It features a three-piece body construction with a full-port 316 stainless steel ball and a non-locking handle. The valve is rated for steam, water and vacuum service up to 29 in Hg.

Installers needing a full-port bronze valve

This valve suits plumbers and maintenance teams who need a straight-pattern, three-piece bronze valve with a 316 stainless steel ball for steam up to 150 psi or water up to 600 psi. It is not for systems requiring a locking handle, 3-A sanitary compliance, combustible-gas rating or a different nominal size.

Three-piece bronze valve under sustained pressure

Under continuous steam service at 150 psi the bronze body and 316 stainless ball maintain sealing integrity without the deformation seen in short-cycle tests. The 600 psi water rating holds during extended duty, and the 29 in Hg vacuum rating remains stable over long evacuations. The non-locking handle allows quick manual operation but does not prevent accidental movement in high-vibration environments.

Highlights

  • Full-port flow with 316 stainless steel ball
  • 600 psi pressure rating for demanding water lines
  • 150 psi steam rating for heating systems
  • Vacuum service to 29 in Hg for versatile installs
  • Lead-free bronze body meets Prop 65 requirements

Specifications

BrandAPOLLO
TypeOther

Questions about this item

What pipe size and type must I have to install this 1-1/4" sweat valve?

You need 1-1/4 inch copper tubing prepared for sweat soldering; the valve ends are plain socket for a direct soldered joint.

Can I keep my existing 150 psi steam piping when fitting this bronze ball valve?

Yes, the valve is rated for 150 psi steam service and 600 psi water, oil or gas, so it matches standard low-pressure steam lines.

How do I verify the full-port ball is moving freely after soldering the valve in line?

Operate the lever from fully closed to fully open; the handle should turn smoothly and the ball port will align with the bore when open.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.