We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve with sweat connections and lever handle

Apollo

Apollo 82LF20601 1-1/4" Sweat Bronze Ball Valve

SKU CH-GJTC-DXQEF

Lead-free bronze inline ball valve with sweat connections, full-port flow, 600 psi CWP rating and blowout-proof stem for plumbing systems

  • TypeOther
  • Lead-free bronze body meets potable-water standards
  • Full-port design maintains unrestricted flow through the valve
  • Blowout-proof stem prevents stem ejection under pressure
  • Rated 600 psi CWP and 150 psi WSP for demanding systems
  • Sweat-by-sweat connections suit copper tube installations

Lead-free bronze ball valve

This Apollo inline valve is a 1-1/4 inch sweat connection component designed for potable water and hydronic piping systems. The three-piece full-port body uses lead-free bronze and a lead-free chrome-plated brass ball to meet low-lead requirements. A blowout-proof stem and PTFE body seals support reliable shut-off in residential and commercial installations.

Sweat joint pressure and temperature limits

The sweat-by-sweat ends require copper tubing joined with solder, so installer skill and local code compliance determine the practical pressure boundary. Rated at 600 psi cold working pressure and 150 psi steam working pressure, the valve operates from -20 to 450 degrees Fahrenheit. Exceeding these limits or using incompatible tube sizes voids the pressure rating.

1-1/4 inch pipe size decides fit

Only piping with a matching 1-1/4 inch tube size will seat correctly on the sweat ends without adapters. The RPTFE seats and C27450LF brass stem are built around this nominal bore, so reducers or larger tubing change flow characteristics and sealing performance. Verify the exact pipe schedule before ordering.

Highlights

  • Lead-free bronze body meets potable-water standards
  • Full-port design maintains unrestricted flow through the valve
  • Blowout-proof stem prevents stem ejection under pressure
  • Rated 600 psi CWP and 150 psi WSP for demanding systems
  • Sweat-by-sweat connections suit copper tube installations

Specifications

BrandAPOLLO
TypeOther

Questions about this item

Should I choose the 1-1/4" sweat version or look for a different pipe size?

This valve is built for 1-1/4 inch copper pipe with sweat connections on both ends; select it only when your supply lines match that exact tube size.

What does the 600 psi CWP rating mean once the valve is installed?

It indicates the valve can handle up to 600 psi of cold water pressure in normal service; steam duty is limited to 150 psi WSP.

How does the sweat connection affect what pipe I can use?

The sweat x sweat ends require soldering directly to 1-1/4 inch copper tubing; no threaded or press-fit adapters are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.