We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze inline ball valve with threaded FNPT connections

Apollo

Apollo 82LF10701 1-1/2" FNPT Bronze Ball Valve Inline

SKU CH-PTWY-H9HPT

Bronze ball valve handles water and steam up to 600 psi with a full-port chrome-plated brass ball

  • TypeOther
  • Full-port design allows unrestricted flow
  • Bronze body resists corrosion in water systems
  • Rated for 600 psi operating pressure
  • Handles steam service up to 150 psi
  • Vacuum service rated to 29 in Hg

Apollo 82LF10701 Bronze Ball Valve

The Apollo 82LF10701 is a manual two-way ball valve with a bronze body and chrome-plated brass ball. It features a full-port design and straight body style rated for 600 psi operating pressure and 150 psi steam pressure. The 1-1/2 inch FNPT connections suit inline plumbing installations.

Suitable Applications and Limitations

This valve suits steam and water systems needing full flow and 29 in Hg vacuum rating. It lacks a locking handle and is not rated for combustible gas or 3-A sanitary standards. Buyers needing gas service or sanitary compliance should look elsewhere.

Deciding Specification — 600 psi Operating Pressure

The 600 psi maximum operating pressure is the primary figure that determines whether this valve matches the system design. Verify that the application pressure stays within this limit before purchase.

Highlights

  • Full-port design allows unrestricted flow
  • Bronze body resists corrosion in water systems
  • Rated for 600 psi operating pressure
  • Handles steam service up to 150 psi
  • Vacuum service rated to 29 in Hg

Specifications

BrandAPOLLO
TypeOther

Questions about this item

What pipe fitting do I need to connect the 1-1/2" FNPT threads on this Apollo valve?

You need a matching 1-1/2" male NPT fitting on the pipe or hose; the valve has female NPT ends that seal with thread tape or pipe dope.

Will the 600 psi pressure rating handle the same steam line as my older 150 psi rated valve?

The valve is rated for 150 psi steam and 600 psi water, oil or gas; if your existing line stays at or below 150 psi steam it will work, but do not exceed that limit.

How can I verify the full-port ball is opening completely after I install the valve?

With the handle parallel to the pipe the bore is fully open; turn the handle a quarter turn until it is perpendicular and flow should stop completely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.