We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel inline ball valve with spring-return handle

Apollo

Apollo 7650801 2 in FNPT Stainless Steel Ball Valve Inline Trap

SKU CH-A0M9-30E0K MPN 7650801

Stainless steel inline ball valve with spring-return handle rated for 500 psi CWP and 150 psi WSP from -50 to 500 °F

  • TypeDrain Components
  • Inline trap integrates shut-off and drainage in one body
  • Spring-return handle closes automatically for fail-safe operation
  • 316 stainless steel body and ball resist corrosion across -50 °F to 500 °F
  • MPTFE seats and PTFE seals handle 1,500 psi CWP and 150 psi WSP
  • Blowout-proof stem with 304 stainless handle adds durability and grip

Stainless Steel Inline Ball Valve

The Apollo 7650801 is a 2-inch FNPT inline ball valve constructed from 316 stainless steel for the body, ball and stem. It uses a two-piece body design with PTFE body seals and MPTFE seats, rated for 1,500 psi CWP and 150 psi WSP across a temperature range of -50 to 500 degrees F. A spring-return handle made from 304 stainless steel with a vinyl grip provides automatic closure, while a blowout-proof stem enhances safety during operation.

Ideal for automated shut-off in corrosive media

This valve suits process lines that require a fail-closed response in chemical, steam or hydronic systems where 316 stainless steel construction and high pressure ratings are specified. It is not for applications needing manual lever operation, full-port flow characteristics, or larger pipe diameters than the 2-inch FNPT connections provided.

Spring-return handle with blowout-proof stem

The defining specification is the spring-return handle combined with a blowout-proof stem, which forces the valve to close automatically on loss of actuation and prevents stem ejection under pressure. This safety pairing determines whether the valve meets the fail-safe requirements of the intended piping system.

Highlights

  • Inline trap integrates shut-off and drainage in one body
  • Spring-return handle closes automatically for fail-safe operation
  • 316 stainless steel body and ball resist corrosion across -50 °F to 500 °F
  • MPTFE seats and PTFE seals handle 1,500 psi CWP and 150 psi WSP
  • Blowout-proof stem with 304 stainless handle adds durability and grip

Specifications

TypeDrain Components
BrandApollo
Model7650801

Questions about this item

Does the spring-return handle on the Apollo 7650801 close automatically if the valve is left open?

Yes, the spring-return mechanism forces the handle back to the closed position whenever the operator releases it, providing fail-safe shut-off during continuous service.

What piping connections must already be in place to install this 2-inch FNPT valve?

You need a 2-inch male NPT thread on each side of the pipeline so the female NPT ends can be screwed on with thread sealant or tape.

Will the 316 stainless steel body and PTFE seals handle the same 150 psi steam pressure as older bronze traps?

The valve is rated for 150 psi WSP steam service and the PTFE body seal is compatible with that pressure, so it can replace a bronze trap operating at the same steam rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.