We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel inline ball valve with spring-return lever handle and female NPT threads

Apollo

Apollo 7650401A 3/4" FNPT Stainless Steel Ball Valve

SKU CH-X2SK-BVB2S MPN 7650401A

A 3/4-inch inline ball valve with spring-return lever handle, 316 stainless steel internals, 2,000 PSI CWP and 150 PSI WSP ratings for water and steam service from -50 to 500 degrees F

  • TypeDrain Components
  • Spring-return lever handle automates valve closure
  • 316 stainless steel ball and stem resist corrosion
  • 2000 PSI CWP rating handles high-pressure water systems
  • 150 PSI WSP rating supports steam service applications
  • Adjustable packing gland enables on-site seal maintenance

Apollo 3/4" Stainless Ball Valve

The Apollo 7650401A is a 3/4 inch inline two-piece manual ball valve built for water and steam service. It uses female NPT threads on both ends for direct piping installation. The stainless steel body with 316 stainless ball and stem suits industrial and commercial plumbing systems needing corrosion resistance. Buyers needing larger diameters or flanged connections must look elsewhere.

Spring-Return Handle with MPTFE Seats

The spring-return lever handle automatically returns the valve to its configured position for fail-safe operation. Carbon and graphite reinforced MPTFE seats with PTFE seals provide sealing across the pressure range. An adjustable packing gland allows stem packing maintenance without removing the valve. The blowout-resistant stem design retains the stem inside the body under pressure. Systems requiring manual locking handles or pneumatic actuation are not served by this configuration.

2000 PSI CWP Rating and 500 Degree Limit

Rated at 2000 PSI cold working pressure and 150 PSI working steam pressure with 29 in Hg vacuum capability. The operating temperature spans -50 to 500 degrees Fahrenheit for broad fluid compatibility. Standard port flow suits general on-off control in hydronic and steam loops. Applications exceeding the pressure ratings or requiring full-port flow capacity fall outside this valve's design envelope.

Highlights

  • Spring-return lever handle automates valve closure
  • 316 stainless steel ball and stem resist corrosion
  • 2000 PSI CWP rating handles high-pressure water systems
  • 150 PSI WSP rating supports steam service applications
  • Adjustable packing gland enables on-site seal maintenance

Specifications

TypeDrain Components
BrandApollo
Model7650401A

Questions about this item

How often will the MPTFE seats and PTFE seals need replacement under normal service?

The carbon and graphite reinforced MPTFE seats and PTFE seals are designed for long service life; replacement frequency depends on cycle count and media cleanliness rather than a fixed interval.

What pressure limit is reached first during sustained high-pressure water service at 2,000 PSI CWP?

The 2,000 PSI CWP cold working pressure rating is the primary limit for continuous water service; the 150 PSI WSP steam rating applies only to steam duty.

How much heat does the stainless steel body radiate when the valve runs all day near the 500 degree F upper temperature limit?

At temperatures approaching 500 degrees F the stainless steel body will become very hot to the touch; plan for insulation or guarding to protect personnel and nearby components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.