We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel inline ball valve with locking handle

Apollo

Apollo 7610627 1-1/4" FNPT Stainless Steel Ball Valve

SKU CH-Q42F-A5NHT MPN 7610627

Manual two-way ball valve in 316 stainless steel rated for 1,500 psi water and 150 psi steam with locking handle

  • TypeDrain Components
  • Full-port flow with 316 stainless ball for corrosion resistance
  • Locking handle prevents accidental operation during service
  • Rated to 500 psi steam pressure for high-temperature lines
  • Vacuum service to 29 in Hg for negative-pressure systems
  • Two-piece straight body allows inline maintenance without pipe removal

Stainless steel two-way ball valve

This Apollo 7610627 valve controls flow in steam and water lines using a manual quarter-turn handle. The body and ball are both 316 stainless steel with a standard-port, two-piece straight construction. A locking handle secures the valve in the open or closed position.

Suitable for high-pressure liquid and steam systems

The valve handles up to 1,500 psi operating pressure and 150 psi steam pressure with a 29 in Hg vacuum rating. It is not rated for combustible gas service or 3-A sanitary compliance, so food-grade or gas-distribution installers should select a different component.

1-1/4 inch FNPT connection size

The nominal valve size is 1-1/4 inches with female National Pipe Thread ends for inline installation. This single dimension determines whether the valve matches the existing piping.

Highlights

  • Full-port flow with 316 stainless ball for corrosion resistance
  • Locking handle prevents accidental operation during service
  • Rated to 500 psi steam pressure for high-temperature lines
  • Vacuum service to 29 in Hg for negative-pressure systems
  • Two-piece straight body allows inline maintenance without pipe removal

Specifications

TypeDrain Components
BrandApollo
Model7610627

Questions about this item

What pipe thread does the 1-1/4" FNPT inlet require for a leak-free seal?

It needs a matching 1-1/4" male NPT thread with sealant or tape; the valve body is straight-pattern stainless steel with a standard-port 316 ball.

Can the 150 psi steam rating handle the same line pressure as the 1,500 psi water rating on my existing system?

No — steam service is limited to 150 psi while water service allows 1,500 psi; do not exceed the steam limit on shared piping.

How do I verify the locking handle is engaged after installation?

Turn the handle perpendicular to flow; the locking latch should click into the notch and resist hand pressure when you try to rotate it back.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.