Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939976BTC
In stock
Apollo
Apollo 7610227A 3/8" FNPT Stainless Steel Ball Valve Inline
Inline stainless-steel ball valve with 3/8″ FNPT threads rated to 2,000 psi and 150 psi steam
- TypeOther
- Handles 2,000 psi operating pressure with stainless steel body
- Rated for 150 psi steam service in industrial piping
- 29 in Hg vacuum rating ensures reliable shut-off
- 316 stainless steel ball resists corrosion in water systems
- Locking handle prevents accidental operation during maintenance
3/8" FNPT Stainless Steel Ball Valve
The Apollo 7610227A is a manual two-way ball valve with a stainless steel body and 316 stainless steel ball. It features a straight body style, standard port design, and locking handle. The valve is built for steam and water media with a two-piece construction.
Suits steam and water lines needing 2000 psi rating
This valve suits installers needing a locking handle and 2000 psi operating pressure for steam or water service. Buyers requiring 3-A sanitary compliance or a combustible gas rating should look elsewhere as this model carries neither certification. Vacuum service is rated to 29 in Hg.
Maximum operating pressure 2000 psi
The decisive specification is the 2000 psi maximum operating pressure combined with 150 psi steam rating. These limits determine whether the valve matches your system design. The 3/8 inch FNPT connection and stainless steel construction support the pressure rating but do not replace it as the primary selection criterion.
Highlights
- Handles 2,000 psi operating pressure with stainless steel body
- Rated for 150 psi steam service in industrial piping
- 29 in Hg vacuum rating ensures reliable shut-off
- 316 stainless steel ball resists corrosion in water systems
- Locking handle prevents accidental operation during maintenance
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
Will the 3/8" FNPT threads on this Apollo valve connect to my existing copper piping?
The valve uses 3/8 inch FNPT threads. Copper piping typically uses sweat or compression fittings, so you will need a compatible male NPT adapter to join them.
How can I verify the 316 stainless steel ball is sealing properly after installation?
Pressurise the line up to the 2,000 psi operating limit or 150 psi for steam. Check for leaks at the stem and body joints; the locking handle should stay in the closed position.
Does the 7610227A come with pipe-thread sealant or do I buy that separately?
The valve is supplied as the body, ball, stem, locking handle and two-piece stainless construction only. Thread sealant or tape for the FNPT connections must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
