Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933872BTC
In stock
Apollo
Apollo 70LF24301 1/2" Sweat Bronze Ball Valve
1/2" sweat bronze ball valve rated 600 psi water and 150 psi steam with 29 in Hg vacuum service
- TypeOther
- Manual two-way flow control with chrome-plated bronze ball
- Bronze body handles 600 psi water and air service
- 150 psi steam rating suits heating applications
- Vacuum service rated to 29 in Hg for versatility
- Non-locking handle allows quick quarter-turn operation
Product Identity
The Apollo 70LF24301 is a new two-piece bronze ball valve with a 1/2-inch sweat connection. It uses a chrome-plated bronze ball and a non-locking handle for manual two-way control of air or water lines. The straight-body design suits inline plumbing installations where a standard port is acceptable.
Ideal Use And Limitations
This valve serves installers who need a 600 psi water or air rating and a 150 psi steam limit in a bronze body. It is not suited for systems that require a locking handle, a full-port flow path or a combustible-gas pressure rating. Buyers needing 3-A sanitary compliance or a documented surface-roughness value should look elsewhere.
Deciding Specification
The nominal size of 1/2 inch and the sweat-end connection determine whether this valve fits the pipework. Maximum operating pressure reaches 600 psi for water and air, while steam service is capped at 150 psi. Vacuum service is rated to 29 in Hg.
Highlights
- Manual two-way flow control with chrome-plated bronze ball
- Bronze body handles 600 psi water and air service
- 150 psi steam rating suits heating applications
- Vacuum service rated to 29 in Hg for versatility
- Non-locking handle allows quick quarter-turn operation
Specifications
| Brand | APOLLO |
|---|---|
| Type | Other |
Questions about this item
How much sustained pressure can the 1/2" sweat bronze ball valve handle before it reaches its limit?
The valve is rated for a maximum operating pressure of 600 psi and a steam pressure limit of 150 psi, which are the thresholds under continuous use.
Does the bronze body and chrome-plated ball generate noticeable heat or noise when the valve runs all day with water or air?
As a manual two-piece bronze valve with a standard port, it has no moving parts that produce heat or noise during normal operation.
What piping preparation must I already have to install this 1/2" sweat valve inline?
You need 1/2 inch copper tubing ready for sweat soldering, plus flux and solder, to join the valve ends into the line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
